What is the default PIN for Harley key fob?
VIDEO-If your Harley Davidson is equipped with a factory installed alarm then you really need to immediately change your security PIN code. Harley puts a standard factory preset PIN code and it is usually 31313.
How do you reset the pin on a Harley-Davidson 2016?
- Turn the IGN key to IGNITION and immediately hold both turn signal switches until 5 dashes appear in the odometer window.
- Enter the first digit of your PIN by pressing the LEFT turn signal switch (X) times.
- Press the RIGHT turn signal switch 1 time to move to the next digit.
How do you reset the pin on a Harley 2017?
How to disarm a Harley Davidson no key fob?
Within three seconds, simultaneously press both the left and the right turn signal switches. After the turn signals flash once, the system enters the transport mode. With the fob removed, the motorcycle can be moved without setting off the alarm. With the fob present, turn the ignition switch to IGNITION to disarm the system. 1.
How much does it cost to program a Harley Davidson key fob?
If your bike is equipped with the Smart Security System, you will need to visit a local Harley Davidson dealer to have your key fob(s) professionally programmed. Expect to pay around $45 per key fob. The procedure should take less than an hour, depending on the wait time ahead of you.
Can a security FOB be changed on a new Harley Davidson?
If you bought your bike new from the dealer, this information should have been given to you, but that is not always the case. If your bike has security, as well as the fob it can have a backup PIN. It will be a five-digit number that your local dealer can change or set for you using the Digital Tech system.
How to set pin over ride on HD security alarm?
If you haven’t set the PIN over ride for your HD security alarm system…do it now! Here’s how you do it… 1. Select 5 digit code ( each digit being a 1 thru 9) and record it on the wallet card in the owners manual. 2. With an assigned FOB present, turn IGN key ON with the handlebar kill switch in the OFF position
Within three seconds, simultaneously press both the left and the right turn signal switches. After the turn signals flash once, the system enters the transport mode. With the fob removed, the motorcycle can be moved without setting off the alarm. With the fob present, turn the ignition switch to IGNITION to disarm the system. 1.
How many digits are in the Harley key fob?
The TSSM code consists of five digits. Each digit can be any number from 1 to 9. The personal code must be used to disarm the security system in case the Harley key FOB becomes unavailable. Harley uses the same five digit pin for all TSSM equipped motorcycles.
If you bought your bike new from the dealer, this information should have been given to you, but that is not always the case. If your bike has security, as well as the fob it can have a backup PIN. It will be a five-digit number that your local dealer can change or set for you using the Digital Tech system.
If you haven’t set the PIN over ride for your HD security alarm system…do it now! Here’s how you do it… 1. Select 5 digit code ( each digit being a 1 thru 9) and record it on the wallet card in the owners manual. 2. With an assigned FOB present, turn IGN key ON with the handlebar kill switch in the OFF position