What is the crank pulley on a Mercedes 55 AMG?
At the heart of the crank pulley is our 3% under-driven, 6 rib harmonic damper. Utilizing the same race proven design we have been running on the M156 engines making in excess of 1000 horse power.
What’s the weight of a Mercedes 55 supercharger pulley?
While still being a dampened pulley, overall weight is dropped from the stock 10.5 lbs to 6.5 lbs. Incorporating our modular, and swappable supercharger pulley rings. We have created the best pulley you can buy for your AMG 55 vehicle. At the heart of the crank pulley is our 3% under-driven, 6 rib harmonic damper.
What happens when a crank bolt breaks on a Mitsubishi L200?
Once this happens, catastrophically the pulley casting breaks at the boss and the retaining bolt gets sheared off as it breaks away. Sending the crankshaft end plate washer and bolt-half out of the engine bay with considerable force.
What to do with a broken crankshaft pulley?
Heavy steering and charge warning light on the dash, you pull over and lift the bonnet/hood – you are faced with a handful of drive belts, and a broken crankshaft pulley. There is pretty much nothing more you can do except phone for recovery. When you get to look at the damage you can see what events lead to this failure.
What do you use to loosen a Mercedes crankshaft pulley?
You will need to use Mercedes harmonic balancer tool to hold the crankshaft pulley in place as you loosen up the 27 mm bolt. You will use the harmonic balancer tool to keep the crankshaft from turning. Next, use a 27 mm socket on the bolt to loosen it up.
Where is the pulley release on a Mercedes?
Pull the hood release on the lower left corner of the dashboard. Go to the front of the car and pull on the hood handle. Next, lift and secure the hood in the upright position.
What do you use to keep a Mercedes crankshaft from turning?
You will use the harmonic balancer tool to keep the crankshaft from turning. Next, use a 27 mm socket on the bolt to loosen it up. You will need to use a breaker bar such as Neiko 00206A 1/2 Inch Drive Premium Breaker Bar, 24″ Length | Cr-V Steel to get this bolt loose.
What kind of breaker bar do I need for a Mercedes pulley?
You will need to use a breaker bar such as Neiko 00206A 1/2 Inch Drive Premium Breaker Bar, 24″ Length | Cr-V Steel to get this bolt loose. If you can’t get it loose you can add a cheater pipe to your breaker bar. You will be applying over 200 Nm of force to the bolt which requires is a considerable amount of energy.