What is the code for the seat belt pretensioner?
5) My code was table 10, code 02 which is drivers side pre-tensioner. 6) Start by disconnecting the battery. 7) Disconnect the under seat connector freeing the seat from the wiring harness.
What does DTC code b1877 stand for?
The Restraints Control Module (RCM) checks all of the safety Seat Belt Pretensioners for faults. If the RCM detects a low resistance or open on the Driver Safety Seat Belt Pretensioner circuits, it will store the Diagnostic Trouble Code (DTC) B1877 in memory and illuminate the air bag warning indicator.
How to fix the seat belt pretensioner light?
17) Plug the yellow connectors together reconnecting the pre-tensioner to the car. I rigged it up so I could plug in the seat while it was sitting outside next to the door.
How much does it cost to repair A b1877 pretensioner?
Check for damaged components and look for broken, bent, pushed out, or corroded terminals. The cost of diagnosing the B1877 code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
The Restraints Control Module (RCM) checks all of the safety Seat Belt Pretensioners for faults. If the RCM detects a low resistance or open on the Driver Safety Seat Belt Pretensioner circuits, it will store the Diagnostic Trouble Code (DTC) B1877 in memory and illuminate the air bag warning indicator.
What to do if you get A b1877 code?
Start by checking the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost to diagnose the B1877 code is 1.0 hour of labor.
Check for damaged components and look for broken, bent, pushed out, or corroded terminals. The cost of diagnosing the B1877 code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Why is my seat belt tensioner not working?
The seat belt tensioner igniter is associated with the reel in the pillar beside the door. A resistance too high might indicate an open or loose connection in the cabling. If you have tried clearing the code and it won’t stay clear remove the pillar to access the igniter and verify the connection is tight.