What is Kure n Seal 30?
Kure-N-Seal™ 30 is a transparent, 30% solids, solvent-based, acrylic curing membrane. Apply it to damp or dry surfaces to provide a high-gloss finish. Yield. For curing only, 1 coat may be sufficient; 2 coats, however, will give best results.
What is Kure n Seal?
Kure-N-Seal™ is a transparent, sprayable, acrylic-based polymer solution that cures, seals, and dustproofs freshly placed or aged concrete in a single operation. It complies with ASTM C 309. Yield. Ft2/gallon per coat ( m2/L)
What is the longest lasting concrete sealer?
Epoxy concrete sealers are the most durable, making them good for sealing garage floors and high-traffic retail environments. Softer acrylic sealers, which require a sacrificial floor wax, are more affordable and popular for residential concrete floors, including basements.
How long do you have to wait to seal concrete?
28 days
When to seal concrete Allow new concrete to cure completely (at least 28 days or as recommended). Most sealers must be applied under dry conditions. Applying to damp concrete could cause haziness or loss of adhesion. Air temperatures should be above 50°F during sealer application and for at least 24 hours after.
Why did my sealant turn white?
A white or cloudy color is caused by moisture that is trapped inside the sealer. However, if it’s too hot and too humid, then also it’s possible the sealer surface could dry faster than the moisture can escape. The sealer was applied too thick. It’s important to apply concrete sealers in thin and even coats.
How long should you wait before sealing concrete?
Allow new concrete to cure completely (at least 28 days or as recommended). Most sealers must be applied under dry conditions. Applying to damp concrete could cause haziness or loss of adhesion. Air temperatures should be above 50°F during sealer application and for at least 24 hours after.