Menu

Navigation

What is Ace Manager?

Posted on by Arif Clayton

What is Ace Manager?

ACEManager is a configuration and diagnostic tool for the Sierra Wireless AirLink Raven modems.

How do I access ACEManager?

Launch an internet browser and type 192.168. 13.31:9191 into the search bar and hit enter. The ACEmanager login should appear if the connection was successful. Internet Explorer, Firefox, and Chrome are all compatible.

How do I connect my AirLink RV50?

Setup Steps

  1. Configure default Ethernet connection.
  2. Update the firmware.
  3. Set up the AirLink to be on a network.
  4. Disable ACEManager “Over-The-Air”
  5. Configure SSH Interface.
  6. Configure SMS settings.
  7. Configure Port Filtering and Outbound Ports.
  8. (Optional) Set trusted inbound and outbound IP addresses.

How do I reset my rv50?

Press and hold the reset button for 7-10 seconds until the Power LED turn red. This will indicate a user-initiated hardware factory reset. Press and hold the reset button for 7-10 seconds until all four LEDs turn red. This will indicate a user-initiated hardware factory reset.

How do I reset my rv50 modem?

How do I access Sierra Wireless?

The default login credentials are: Login: user, and Password: 12345. *If you are connecting via USB, download the USB drivers from the Support page for your AirLink model: http://www.sierrawireless.com/Support/Downloads.aspx ** Only for devices with a Wi-Fi X-Card installed.

How do I reset my GX450?

GX450 Factory Reset Button (Restore Defaults) With the device powered on, holding the Reset button down for 7–10 seconds to resets the GX Series gateway to its factory default settings. Momentarily press and release the button to reboot the GX Series gateway.

How do I connect to MG90?

Procedure

  1. Insert the SIM card. Insert the SIM card into slot A1 and re-install the SIM door.
  2. Connect antennas. Connect antennas to the AirLink MG90.
  3. Power up the MG90.
  4. Log in to the LCI and configure the device.
  5. Set up your cellular connection.
  6. Update firmware and secure the device.
  7. Configure Wi-Fi.
  8. Configure GPS.

How do I factory reset my Sierra Wireless rv50?

How do I factory reset my Sierra Wireless GX450?