What is a humidistat on an extractor fan?
A humidistat is a sensor within a certain module in the fan that detects the level of humidity in the air, and then switches ON or OFF the fan. The humidistat can be set and adjusted as needed, so that when there’s a lot of humidity in the air, the fan will automatically be ON until the humidity is eliminated.
How do I adjust my xpelair fan?
Operate the fan using an on/off switch (not supplied). When the switch is turned off, the fan continues to operate for the set time delay. To adjust the over-run period, turn the control “T” clockwise to increase and anti-clockwise to decrease – see Figure F.
How long should a bathroom extractor fan stay on?
A bathroom extractor fan typically stays on for 20 seconds to 20 minutes once you’ve finished in the bathroom. The length of time an extractor fan stays on is usually decided when the fan is being bought and being installed.
What is a humidistat switch?
A humidistat or hygrostat is an electronic device analogous to a thermostat but which responds to relative humidity, not temperature. A humidistat has the functionality of a switch and is not just a measuring instrument like a hygrometer is.
How does a humidistat extractor fan work?
A humidistat is a switch which controls the fan depending on the amount of moisture in the air. If there’s a lot of moisture, it turns the fan on. When the humidity level is reduced, it switches the fan off. It’s true that the humidistat will turn the fan on when you have a bath or shower and the humidity is high.
Why does my extractor fan keep turning on?
The most common reason why a bathroom fan turns on by itself, is that it is connected to a humidity controlled switch. Whenever the humidity level rises above a set point it will turn on automatically. The turn-on humidity setting can be adjusted on most switches. Humidity levels change with the seasons.
How do I clean my xpelair extractor fan?
Depending on how dirty your extractor fan is, you may wish to cover your mouth and use eye protection.
- Step 1: Turn Off The Power.
- Step 2: Remove The Fan Cover & Soak In Soapy Water.
- Step 3: Dust Inside The Unit.
- Step 4 Scrub Inside The Unit With Soapy Water.
- Step 5: Allow Everything To Dry.
- Step 6: Replace The Cover.
How do I clean my xpelair Premier?
How To Clean the Bathroom Fan
- Take off the fan cover and soak it in the soapy water.
- Remove the fan blade and wipe it with the window cleaning fluid on both sides.
- With a damp cloth, wipe away any build-up or debris.
- Locate the motor and clear debris away from it with the cotton buds.
What kind of shower fan does Xpelair use?
The Xpelair DX100 4 inch/100mm single speed axial extract fans are ideal for use in bathrooms, shower rooms and toilets. They come supplied with a universal fitting kit that includes a telescopic wall tube, gasket x 2, outer grille and skirt moulding.
Why are bathroom extractor fans called simply Silent?
They’ve been purposefully designed to seamlessly blend with your bathroom décor and are ideal for assisting in humidity and odour removal while slowing the growth of mould in your ensuite or bathroom. They have been suitably called the Simply Silent range because, well, they are.
How does Xpelair ghost air movement technology work?
Xpelair have introduced us to Ghost Air Movement Technology. It uses the quietest motors and expertly designed parts for the best air flow to produce noise slightly quieter than rustling leaves.