What is a 3/16 drill bit in metric?
| Drill Bit Hole Diameters | ||
|---|---|---|
| Metric Size | Fractional Size | |
| 3 mm | .1181 | 3/16 |
| 4 mm | .1575 | 13/64 |
| 5 mm | .1968 | 7/32 |
What size is a 5/16 drill bit in MM?
Drill Bit Size Chart
| Size | Decimal Equivalent | Size |
|---|---|---|
| 91 | 0.0083 | 7.75 mm |
| 90 | 0.0087 | 7.80 mm |
| 89 | 0.0091 | 7.90 mm |
| 88 | 0.0095 | 5/16″ |
What is the equivalent drill size in mm to 13 32?
Drill Size Conversion Table
| 0.0217 | 13/32 | |
| 0.0225 | 74 | |
| 0.0236 | ||
| 0.0240 | 73 | 27/64 |
| 0.0250 | 72 |
What can I use instead of a 5’8 drill bit?
If you break it down to 16th’s, 5/8ths is 10/16ths. So the next size larger would be 11/16th’s. If you want to stay in 1/8ths, than obviously it’s 6/8ths or 3/4″. If you break it down to 16th’s, 5/8ths is 10/16ths.
What size is a 5.5 mm drill bit?
Standard metric drill bit sizes
| Drill size | Diameter (in) |
|---|---|
| 5.4 mm | 0.2126 |
| 5.5 mm | 0.2165 |
| 5.6 mm | 0.2205 |
| 5.7 mm | 0.2244 |
What size drill bit is number 29?
9/64″
| To Tap This Size Screw Or Bolt: | Use This Drill Bit: | (Closest Fractional:) |
|---|---|---|
| 8-32 NC | #29 | – |
| 8-36 NF | #29 | 9/64″ |
| 8-40 NS | #28 | – |
| 3/16-24 NS | #26 | – |
What size is 3mm drill bit?
Drill sizes to 1″ diameter
| Drill sizes to 1″ diameter Legend Fractional Inch Letter Drill Millimeters Number Drill | ||
|---|---|---|
| Millimeters | Inches | Designation |
| 3mm | .1181″ | |
| 3.048mm | .12″ | #31 |
| 3.175mm | .125″ | 1/8″ |
Can I use a 3/8 drill bit for 10mm?
Yes, a 10mm hanger will physically fit on a 3/8″ bolt.
What standard size is closest to 10mm?
Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 1/8″ | 8mm | 5/16″ |
| 3/16″ | 10mm | 3/8″ |
| 1/4″ | 11mm | 7/16″ |
| 5/16″ | 13mm | 1/2″ |
What can I use instead of a 5/16 drill bit?
5/16 converts to 10/32. Assuming your bit set is that granular, the next larger size is 11/32, and the next smallest size is 9/32. Those aren’t necessarily common sizes, however. The next size up in x/16 would be 6/16, which is 3/8.
What is the standard size of a drill bit?
Another size related feature to focus on is the size of the drill bit, as we mentioned earlier. The most common drill bit sizes are 1/16 to 1/4″ and most large sets will also include increments up to 1/2″ thick.
What size drill bit for screws?
Your pilot-hole drill-bit size will depend on the size of your sheet-metal screw. A size-4 screw should have a pilot-hole drill size of 3/32 inches; size 6, 7/64 inches; size 8, 1/8 inches; size 10, 9/64 inches; size 12, 5/32 inches; size 14-1/4 inches, 3/16 inches; and 5/16 inches, 1/4 inches.
What is a drill bit?
In the oil and gas industry, a drill bit is a tool designed to produce a generally cylindrical hole ( wellbore) in the earth’s crust by the rotary drilling method for the discovery and extraction of hydrocarbons such as crude oil and natural gas. This type of tool is alternately referred to as a rock bit, or simply a bit.