What happens if DTC p1626 is not stored?
The engine continues to start and run as long as DTC P1626 is stored. If the problem affects inputs to the Vehicle Theft Deterrent System (VTD) signal, the starter motor may be disabled. The engine is running. The PCM has detected a loss of the state of health serial data message from the theft deterrent system.
Why do I have p1626 code on my car?
This can be from a faulty BCM which is common in these cars. The body control module (BCM), produces the theft deterrent crank relay and fuel enable signal when ignition is ON and the proper ignition code voltage value is detected. The powertrain control module (PCM) monitors the fuel enable signal during crank.
When do you clear a pending trouble code?
1. Emissions related. 2. Sets a Pending Trouble Code after one failed driving cycle. 3. Clears a Pending Trouble Code after one successful driving cycle. 4. Turns on the MIL after two consecutive failed driving cycles. 5. Stores a freeze frame after two consecutive failed driving cycles.
What does it mean to have an error code p1610?
Error Code P1610 happens when an unregistered or damaged key is used to start the engine five or more times consecutively, causing the system to lock, and the vehicle unable to be driven. Common Symptoms. As with other error codes, this code triggers the Check Engine light and registers the code to the vehicle’s system.
This can be from a faulty BCM which is common in these cars. The body control module (BCM), produces the theft deterrent crank relay and fuel enable signal when ignition is ON and the proper ignition code voltage value is detected. The powertrain control module (PCM) monitors the fuel enable signal during crank.
The engine continues to start and run as long as DTC P1626 is stored. If the problem affects inputs to the Vehicle Theft Deterrent System (VTD) signal, the starter motor may be disabled. The engine is running. The PCM has detected a loss of the state of health serial data message from the theft deterrent system.