What does the wrench symbol on my car mean?
In many European vehicles, a simple wrench (spanner) image will be displayed temporarily as a service interval approaches. It will likely be in gray scale, rather than a more expected amber. Note that if you see a wrench in red, it indicates a serious powertrain problem. Keep the Symbol meanings with you!
How to reset service wrench on Mercedes ML?
Press and hold the “0” button and turn the ignition back to position II (ON) Continue to hold the button for 10 seconds or when you hear a signal sound and see the new service interval Release the button and switch the ignition to position 0 (OFF) We hope you find these reset procedures helpful.
How to turn off service wrench reminder light on Hyundai Kona?
To turning off the Service Wrench Reminder Light on 2017 2018 Hyundai Kona, conform to the following instructions: When you turn on the engine and see on the screen, press the OK button located at the steering wheel for more than 5 seconds. Then when the miles and days blink press the OK button for more than 1 second.
What does the red triangle on the wrench mean?
The first is a single triangle, which may appear in red or yellow/amber. It indicates the approach of a service interval. The second adds another triangle inside the first. It indicates the service is past due and may also appear in red or yellow/amber.
How do I reset the service due wrench light?
Turn the key into the ON position. Select the “Settings” menu with the controls located on either the windshield wiper arm or the steering wheel. Select the “Service” submenu and then select the “Reset” option and then press the OK button to reset the display. Press the OK button once more to confirm.
What does service wrench icon on Polaris speedometer mean?
by Chris Gilliland. The flashing service wrench icon on a Polaris Sportsman’s speedometer can lead many riders to panic. In most cases, this icon is triggered by the engine’s hours of operation reaching a programmed interval, and it acts as a friendly reminder that your ATV is ready for a routine servicing.
Press and hold the “0” button and turn the ignition back to position II (ON) Continue to hold the button for 10 seconds or when you hear a signal sound and see the new service interval Release the button and switch the ignition to position 0 (OFF) We hope you find these reset procedures helpful.
How do you release the 0.0 / wrench button?
While holding the 0.0/ WRENCH button, insert the key and turn the ignition to the ON position (the display will show “Service now!” or the “wrench” symbol will appear) Release the “0.0/ WRENCH” button and then press the M or MIN (minute) button on the other side of the instrument cluster