What does the T belt light mean on a Toyota Hilux?
It’s just a reminder that it’s time for a new belt.
How do you reset the timing belt light on a Toyota Hilux 1kd?
Press and hold the odometer/trip display button whilst turning ignition on. Hold button down for 5 seconds then release button. Within 5 seconds, press and release the button. The display will show the reset value.
When should a timing belt be changed on a Hilux?
It’s recommended that you change your Toyota Hilux timing belt every 100,000 miles or every 6 years depending on which comes first.
How to reset timing belt light on Toyota Hilux diesel?
The timing belt light displayed on the dash on a 2007 Toyota Hilux diesel is reset using the following manual procedure. Turn ignition on. Make sure the Odometer/Trip meter display shows odometer information. Turn ignition switch off. Press and hold the odometer/trip display button whilst turning ignition on.
How to reset the D4D T Belt Light?
There is a small wire held on with a screw next to 2 other holes. Loosen the wire and move it , if I recall to the hole at the end. Switch the ignition on (cluster connected) and start the vehicle it should go off. If not then move it to the hole next door….. NOTE: If the light is not on you cannot reset it. It must come on first!
How to reset timing belt on Toyota Landcruiser?
This is tutorial on how to reset timing belt on Toyota Dyna / Toyota Landcruiser (Same procedure for both). 1. T-BELT MODE DISPLAY b) While pressing the trip switch, turn the ignition switch ON and hold it for 5 seconds. c) Release the trip switch, then press the switch again within 5 seconds. d) The digital display should change to T-belt mode.
How do you change the distance on a T Belt?
While in the T-Belt mode, each press of the trip switch will change the displayed value by 10,000km increments. Once ” 20 ” (200,000km) is reached the display reverts back to ” 1 ” (10,000km) again. Remember, this setting is the number of kilometres to be travelled before the light comes on next, and once reset this counter will start from zero.