What does the SRS light on a Honda do?
The secondary restraint system, or SRS, is a safety system in your Honda that controls the airbags, among other things. You would imagine that when the SRS light comes on, that it would be a big deal and need to be checked out immediately.
What does SRS stand for in Honda Civic?
Learn how to do so here. This article applies to the Honda Accord (1990-2002) and Honda Civic/Del Sol (1992-2000). The secondary restraint system, or SRS, is a safety system in your Honda that controls the airbags, among other things.
Can a SRS airbag control module be replaced?
Already Purchased a New or Used SRS Airbag Control Module Replacement? We advise our customers to compare the part numbers of their replacement airbag control module to the vehicle’s original module; if the part numbers do no match, it is unlikely that the airbag module will work in the vehicle.
Do you have to pay for SRS reset service?
Just Plug & Play! This service is 100% compatible with our seat belt repairs. Some modules referred to as “MCU” modules will require additional programming and chip replacement. Such will incur an additional fee of $15. You agree to potentially be required to pay this up charge.
Is the Honda SRS a user serviceable part?
The SRS has no user-serviceable parts. Tampering with or disconnecting the SRS wiring could result in accidental firing of the inflator or could make the system inoperative, which may result in serious injury in an accident. For required servicing of the SRS, see your nearest Honda dealer. Instrument Panel
Do you need to replace the SRS module?
In the event the SRS deploys, the airbag module will not function again and must be replaced. As a reminder, the SRS indicator light will stay on continuously after deployment. Only an authorized Honda dealer should repair or replace the system.
The secondary restraint system, or SRS, is a safety system in your Honda that controls the airbags, among other things. You would imagine that when the SRS light comes on, that it would be a big deal and need to be checked out immediately.
Learn how to do so here. This article applies to the Honda Accord (1990-2002) and Honda Civic/Del Sol (1992-2000). The secondary restraint system, or SRS, is a safety system in your Honda that controls the airbags, among other things.
Can a Honda dealer reset the SRS airbag module?
A Honda dealer will not be able to reset your SRS airbag module and neither will a scan tool. This service will reset your airbag light on and all codes! If your seat belts are locked, blown or not retracting, you will also need to have those repaired.
Is there a way to reset the SRS light?
That’s partially true; however, having the SRS light come on during Honda ownership is almost an expected thing. Having the SRS light come on is so common that the original owner’s manual actually gives a briefing on how to reset it. To do so, you will be “shorting” the system in order to reset the light.
Why is my SRS light not working on my Honda Civic?
I recently had this issue with my 1999 Civic SiR, and it turned out the issue was that the internal contact points of the car horn had corroded. Replacing the car horn, and then resetting the SRS light by disconnecting the battery for about 10 or so minutes fixed things.
What does the SRS light on airbags mean?
The SRS light is a warning light for your supplemental restraint system (airbags). An SRS light means that there is a problem in the system. The first thing I would check is the fuse for the SRS unit.
What happens when the SRS light goes off?
The SRS Light will illuminate for a few seconds then go off. When the SRS Light goes off, unshort the wires. The SRS Light will come back on. Short and hold the wires again. The SRS Light will go off. When the SRS Light goes off, unshort the wires. The SRS Light will blink twice. Turn the ignition off. Start engine as normal.
I recently had this issue with my 1999 Civic SiR, and it turned out the issue was that the internal contact points of the car horn had corroded. Replacing the car horn, and then resetting the SRS light by disconnecting the battery for about 10 or so minutes fixed things.
The SRS Light will illuminate for a few seconds then go off. When the SRS Light goes off, unshort the wires. The SRS Light will come back on. Short and hold the wires again. The SRS Light will go off. When the SRS Light goes off, unshort the wires. The SRS Light will blink twice. Turn the ignition off. Start engine as normal.
The SRS light is a warning light for your supplemental restraint system (airbags). An SRS light means that there is a problem in the system. The first thing I would check is the fuse for the SRS unit.
Where is the memory erase signal on a Honda?
Locate the MES (Memory Erase Signal) connector. It is below the dashboard on the driver’s side of the car plugged into a panel (there is no electrical connection). Figure 1. MES location under the dash. In this step, you will internally make the connection in the plug to “short” it.
How do you turn off the SRS light?
MES connector with “short” wire. With this connection made, turn the ignition key to the “on” position (do not start the engine). The SRS will illuminate for two seconds, then turn off. When the light turns off, disconnect the shorting wire to un-short the circuit. The SRS light will turn on again. When it does, reconnect the shorting wire.
How do you troubleshoot the SRS light on a Honda Civic?
Troubleshoot the SRS by finding the blue 2-pin service check connector underneath your glovebox. Turn off the ignition. Wait ten seconds, then connect the U shaped paperclip to the connector. Turn on the ignition and wait for the SRS light to give you a code.
Why does my SRS light keep coming on?
The SRS (Supplement Restraint System) warns you if something is wrong with the air bag system. Sometimes the light comes on when there’s nothing wrong with the system at all. Performing a quick reset should shut off the light. Pop open the panel underneath the dashboard to reveal the fuse box.
Where is the MES connector on a Honda Civic?
The MES connector is a yellow connector at the top right of the fuse box that connects to an empty socket. Unplug it and pull it out. Figure 1. Circled is the MES connector.
What happens when you reset the SRS light?
The SRS light will blink twice to indicate that its memory has been erased. Turn off the ignition and wait ten seconds to restart the car. The light should come on for a moment then go out. Figure 2. SRS light (highlighted above) will blink twice when it’s been reset.
How do you reset the SRS light on a Honda Civic?
Disconnect the paper clip as soon as the light goes off. When light comes back on reconnect the paperclip. Wait for the light to go off once more then disconnect the paperclip. The SRS light will blink twice to indicate that its memory has been erased. Turn off the ignition and wait ten seconds to restart the car.
How does the SRS reset work on a Honda Accord?
In the case of the SRS reset, you are using a jumper to communicate the reset sequence to the module. I bought the official “tool” from Honda for this task and all it is is a connector with a wire connecting the two terminals. The reset method has you connecting and reconnecting the circuit which can be difficult.
In the case of the SRS reset, you are using a jumper to communicate the reset sequence to the module. I bought the official “tool” from Honda for this task and all it is is a connector with a wire connecting the two terminals. The reset method has you connecting and reconnecting the circuit which can be difficult.
Where is the SRS unit on a Honda Accord?
The SRS unit is mounted on the floorboard near the firewall, which is behind the stock radio. To access the unit, remove the center console and two side panels. There is one screw and one clip on the driver’s side. There are two clips on the passenger’s side.
That’s partially true; however, having the SRS light come on during Honda ownership is almost an expected thing. Having the SRS light come on is so common that the original owner’s manual actually gives a briefing on how to reset it. To do so, you will be “shorting” the system in order to reset the light.
What does the SRS light mean on a Honda Accord?
However, the system does warn you of a system malfunction. The yellow “SRS” light on the dash will light up, indicating a problem with the system. Once you’ve fixed the problem, you need to know how to reset the SRS light on your Accord.
What does the airbag warning light on Honda CRV mean?
Every time you start your Honda CR-V, the computer system runs a self diagnostic check on all major systems. If any of these checks fail, you will see a diagnostic warning light on the dash for the corresponding system. When the airbag system fails this check, you’ll see the airbag light.
MES connector with “short” wire. With this connection made, turn the ignition key to the “on” position (do not start the engine). The SRS will illuminate for two seconds, then turn off. When the light turns off, disconnect the shorting wire to un-short the circuit. The SRS light will turn on again. When it does, reconnect the shorting wire.
The SRS unit is mounted on the floorboard near the firewall, which is behind the stock radio. To access the unit, remove the center console and two side panels. There is one screw and one clip on the driver’s side. There are two clips on the passenger’s side.
Do you need to replace the SRS light?
the SRS deploys, the airbag module will not function again and must be replaced. As a reminder, the SRS indicator light will stay on continuously after deployment. Only an authorized Honda dealer should repair or replace the system. COMPONENTS of SRS AIRBAG ASSEMBLY KNEE BOLSTER RIGHT DASH SENSOR LEFT DASH SENSOR SRS CONTROL UNIT
What does it mean when SRS warning light stays on?
SRS stands for Supplemental Restraint System. If this warning light stays on in your Mercedes Benz, that means that there is a problem with the airbags or the components that are part of the SRS system. It is very unlikely that your airbags are going to deploy randomly, but the concern is that they may not deploy…
What does SRS warning light on dashboard look like?
The SRS warning light on the dashboard usually looks like a side view of a person sitting in a seat with a seat belt on, with a large circle (the airbag) in front of the person.
Where is the SRS plug on a Honda Accord?
(1) Locate MES Plug. It should be located near the driver’s side fuse panel under the dash. The harness is yellow with two wires. (2) Unplug the MES Plug. -Short and hold the leads while you turn the ignition to on. The SRS Light will illuminate for a few seconds then go off.
Where is the SRS light on a Honda Accord?
It should be located near the driver’s side fuse panel under the dash. The harness is yellow with two wires. (2) Unplug the MES Plug. -Short and hold the leads while you turn the ignition to on. The SRS Light will illuminate for a few seconds then go off. -When the SRS Light goes off, unshort the wires. The SRS Light will come back on.
Why does my car not start after shorting out the SRS light?
To make a long story short my car wouldn’t start after shorting out the SRS light when you short the SRS it fries your main control module under the steering wheel which will cause your car to not start. Never Short out anything Electronic it will not fix the problem it will make the situation worse. Was this answer helpful?
The SRS light is a warning light for your supplemental restraint system (airbags). An SRS light means that there is a problem in the system. The first thing I would check is the fuse for the SRS unit. The only way to check this is with a scan tool of some sort. I used a Solus Pro.
Why does my Honda SRS light keep blinking?
The SRS light will blink twice indicating the SRS system and the light are reset. If this procedure is followed correctly and the light remains on, then there may be an actual issue with the SRS system. In this case, it is advised to bring the vehicle to the dealership, where the trouble code can be identified and the issue repaired.