What does the maint reqd light mean Scion tC?

What does the maint reqd light mean Scion tC?

The maintenance light in your Scion tC’s odometer case is designed to turn on when it’s time for a regularly scheduled maintenance of the vehicle. The light is no cause for alarm; it’s simply a reminder to get your tC needs to be serviced. It will not come on again until it’s time to service the tC again.

How do you turn off the maintenance required light on a Scion tC?

1. turn key to ON.
2. cycle odometer display to TRIP A.
3. turn key to OFF or ACC (away from ON)
4. while holding the odometer cycle button, turn key to ON.
5. wait for 5 seconds while the odometer display blinks – – – – – & the MAINT REQ’D light.
6. you’re done!

How do you reset the TPMS on a Scion tC?

To reset the system, first make sure the tire pressures are correct. Turn the engine on, then press and hold the reset button. You’ll find it low and to the right of the steering wheel on the instrument panel. Hold the button down until the TPMS indicator light in the instrument panel blinks slowly 3 three times.

How do I turn off maint reqd?

How do I reset the “Maint Reqd” light?

1. Turn ignition switch to the ON position.
2. Set the Odometer/Trip Display to TRIP A mode.
3. Turn the ignition switch to the OFF position.
4. Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position.
5. The Service Maintenance Reminder Light will.

When do you reset the maintenance required light on a scion?

Once your Scion has been serviced, the “MAINTENANCE REQUIRED” light will need to be reset. Some servicers will neglect to do this, which can lead to premature and unnecessary service light triggers. With only a few simple steps, you can learn how to do it yourself:

How does maintenance required appear on Scion odometer?

The odometer should display a series of dashes that will appear one after the other. After that, a series of “0”s (zeroes) will display and the “Trip A” reading will return. You can now release the button. The “MAINTENANCE REQUIRED” light should be off, and the computer will now begin accumulating miles from zero.

How do you reset trip a on a scion?

Step 1: Insert the key into the ignition and turn the car to the “ON” position. Do not start the engine. Step 2: Make sure the “Trip A” is reading on the odometer. If it is not, depress the “Trip” or “Reset” button until the odometer reads “Trip A.” Step 3: Press and hold the “Trip” or “Reset” button.

Why is my ” maintenance required ” light flashing on and off?

The maintenance required light may being flashing 500 miles before your car is due for service. The “maintenance required” light is not to be confused with the “check engine” light. The picture at the top of this article shows your standard “maintenance required” light; the pictures below show standard “check engine” lights.