What does p0741 mean on a Saab 9-3?
P0741 is a very common OBDII trouble code. It’s know to affect the Saab 9-3 quite often. Here’s what it means: The 9-3 uses a clutch in the torque converter to lock the engine and transmission together at highway speed. P0741 can register whenever this connection is not happening at all or happening properly.
What does trouble code mean on Saab 9-3?
One of the most common problems with the Saab 9-3 is when it throws the P0700 trouble code. A trouble code is a code thrown out by an automatic transmission whenever it detects in the 9-3 that there is an issue that needs your attention. In the case of the P0700, it is a general code.
What are the symptoms of a p0742 trouble code?
Symptoms of a P0742 trouble code may include: Stuck On Indicator Lamp (MIL) illuminated (a.k.a. Check Engine Light) If the torque converter clutch is actually stuck on, the engine may stall at idle.
What is the transmission code on a Saab 9-3?
The 9-3 uses a clutch in the torque converter to lock the engine and transmission together at highway speed. P0741 can register whenever this connection is not happening at all or happening properly. P0741 will not affect the way that the Saab 9-3’s engine performs at all. It is purely a transmission related code.
What kind of car is a 2008 Saab 9-5?
If you think the best things about a European sedan are the powerful yet fuel-efficient turbo engines and the relative exclusivity, you can get both for an affordable price in a 2008 Saab 9-5. Compared with some other premium European sport sedans, the 2008 Saab 9-5 is neither as premium nor as sporty.
When was the last time I serviced my Saab 9-5?
Mileage: 140,136 miles Body Type: Wagon Color: Silver Engine: 4 Cyl 2.3 L Accident reported. Purchased on 09/21/12 and owned in CT until 01/25/21. Driven an estimated 13,166 miles/year. Last serviced at 109,647 miles in Windsor Locks, CT on 08/31/20 • Vehicle serviced • Battery replaced.
P0741 is a very common OBDII trouble code. It’s know to affect the Saab 9-3 quite often. Here’s what it means: The 9-3 uses a clutch in the torque converter to lock the engine and transmission together at highway speed. P0741 can register whenever this connection is not happening at all or happening properly.
The 9-3 uses a clutch in the torque converter to lock the engine and transmission together at highway speed. P0741 can register whenever this connection is not happening at all or happening properly. P0741 will not affect the way that the Saab 9-3’s engine performs at all. It is purely a transmission related code.
What does code p0340 mean on a Saab?
With code P0340 your engine controller limits torque and you loose a good third of your available power. When you replaced coil packs did you use aftermarket or genuine Saab and are all 4 coil packs the same manufacturer?
Where is the ion module on a Saab 9-3?
The ION module is on end of engine, upper right rear near brake and coolant reservoir, rectangular plug wire bundle leads to coil packs.
What causes a Saab 9-3 to fail an emissions test?
P0441 can cause the vehicle to fail an emissions test. Often, the only symptom of P0441 will be the service engine soon light itself. In a few cases there may be other symptoms. Here they are: Check Engine Light – Often, this is the only indication of a problem. Fuel Odor – The EVAP system deals with fuel vapor.
What are the symptoms of Audi A3 p0441?
Often, the only symptom of P0441 will be the service engine soon light itself. In a few cases there may be other symptoms. Here they are: Check Engine Light – Often, this is the only indication of a problem. Fuel Odor – The EVAP system deals with fuel vapor.
What causes P0300 trouble code on Saab 9-3?
There are quite a few things that can cause the P0300 trouble code to trigger in the Saab 9-3. Here are the most common problems that will throw the code. They are presented somewhat in order from most to least likely to be causing the code:
What is the engine code for a 2003 Saab 9-3?
As far as symptoms associated with this code P0340, i am having a loss in power and what seems like a rapid misfire. Currently P0340 is the only engine code I have. Any and all help with this issue would be much appreciated. You do get codes for these, but you don’t have a cam position or separate knock sensor on this engine.
There are quite a few things that can cause the P0300 trouble code to trigger in the Saab 9-3. Here are the most common problems that will throw the code. They are presented somewhat in order from most to least likely to be causing the code:
As far as symptoms associated with this code P0340, i am having a loss in power and what seems like a rapid misfire. Currently P0340 is the only engine code I have. Any and all help with this issue would be much appreciated. You do get codes for these, but you don’t have a cam position or separate knock sensor on this engine.
What does a 9-3 P0300 misfire code mean?
Saab 9-3 P0300 Definition P0300 is a general and random misfire code, which means that the code is not going to tell you which cylinder is causing the misfire. Something is causing cylinders to misfire at random, which is a lot less cut and dry than a cylinder specific misfire code. 9-3 P0300 OBDII Code Symptoms