What does it mean when can Am Commander wont start?

What does it mean when can Am Commander wont start?

To me that means when you turn the key it nothing happens when in the south east is means it wont start. So when you say it wont start, what is happening. You turn the key, press the start button and… nothing? turns over but wont run…?

Is the can Am Commander still under warranty?

Dude it should still be under warranty let the dealer figure it out you shouldn’t be having this problem. Clean your key and dielectric grease the key hole. This has been an issue when moisture is present.

How many miles on my can Am Commander?

I have put on roughly 140 miles on it and the last several times out periodically it wouldnt start.

Why do I hear one click when starting my car?

If the battery appears to be charged (the headlights, stereo and other accessories work) but you only hear one click, then the problem probably lies with the starter motor or the solenoid. The solenoid is the switch that engages the starter motor so it turns the flywheel and starts the engine.

Why does my riding mower make a clicking noise when I turn the key?

If the riding mower makes a heavy clicking or a rapid clattering sound when the key is turned to the start position, there is a problem with the battery or a part of the starting circuit. The clicking noise comes from a part called the starter solenoid.

What to do if your can Am wont start?

Yep got to be in park or neutral also check your fuel pump fuse ignition fuse to. Is the unit all stock? You do have it in park don’t you. Click to expand… pay attention to where you push the start button also..

To me that means when you turn the key it nothing happens when in the south east is means it wont start. So when you say it wont start, what is happening. You turn the key, press the start button and… nothing? turns over but wont run…?

I have put on roughly 140 miles on it and the last several times out periodically it wouldnt start.

Dude it should still be under warranty let the dealer figure it out you shouldn’t be having this problem. Clean your key and dielectric grease the key hole. This has been an issue when moisture is present.

Yep got to be in park or neutral also check your fuel pump fuse ignition fuse to. Is the unit all stock? You do have it in park don’t you. Click to expand… pay attention to where you push the start button also..

What happens when you remove the key from the ignition?

Car Engine Doesn’t Turn Off When Removing Key or Pressing STOP It is a strange problem to have a car that won’t turn off when you remove the key from the ignition or press the Engine Stop button. Your engine will continue to run even when you remove the key from the ignition because the fuel pump is not shutting off.

Why does my car keep running after I remove the key?

Here are the most common problems that cause the engine to keep running even after removing the key from the ignition or press the STOP button. The ignition module may fail, or if your car is equipped with an Engine Push to the Start button, the Keyless module could be the culprit.

Why does my Dodge Lancer starter keep smoking?

Starter actually smoking upon attempting to crank (ignition on “start”) This is a non-start problem on an ’87 Dodge Lancer 2.5L. months, the cranking had been getting weaker, but the car would start. Once started, the engine runs fine.

Why does my car starter smell like smoke?

The smoke was same smell as when I tried to start the car 30 min earlier. A few very weak cranks, then nothing. And this is with available to it. AAA tech suggested burnt bushings in the starter.

How does the push start system on advanced keys work?

Push Button Start System. Suitable for any vehicle, Advanced Keys’ Push Start System provide true keyless ignition experience – just tap the button to start the engine. Equipped with a Push-Start button that is simple to install and provide the functionality of the genuine OEM smart key system.

How does the push button start engine work?

Each time the push button start is pressed, the ignition switches in the order of off, ACC, and ON. Pressing the push button start again from ON switches the ignition off. The engine starts by pressing the push button start while depressing the clutch pedal (manual transaxle) or the brake pedal (automatic transaxle).

Can a push button start system be deactivated?

The push button start system functions (function which can start the engine by only carrying the key) can be deactivated to prevent any possible adverse effect on a user wearing a pacemaker or other medical device. If the system is deactivated, you will be unable to start the engine by carrying the key.

Can a can Am defender start right up?

Last night after letting my defender sit for about 6 hours while at a friends house with the temp around -10 I went to start it and it usually starts right up but this time I have to crank it 5-6 times shutting the key off in between before it finally started, I drove home with no problems.

Last night after letting my defender sit for about 6 hours while at a friends house with the temp around -10 I went to start it and it usually starts right up but this time I have to crank it 5-6 times shutting the key off in between before it finally started, I drove home with no problems.