What does E5 mean on stairlift?
E5- The seat is not in its normal operating position. Try swiveling the seat to reset the sensor. E6- T700 Models is also the seat position sensor. Turn the seat to its riding position and check that it is locked in place. If the seat has been removed make sure the plastic cam is aligned and in the correct position.
How do I stop my stairlift from beeping?
If you have had a powercut, you can temporarily stop the beeping noise by pressing the battery isolation button. The location of this will vary depending on the type of lift you have – this should be shown in your User Guide but if you’re still stuck please feel free to give us a call.
Are stair lifts reversible?
Stairlifts come with directional controls that allow you to travel up and down the stairs. You can then use the controls to reverse back, so the obstruction can be removed and you can continue your journey.
What does it mean when auto lift does not work?
Electric motor runs but will not raise lift. 003. Electric motor runs-raises unloaded but will not raise vehicle. 004. Lift slowly settles down. 005. Slow lifting speed or oil blowing out filter breather cap.
What are the error codes on JLG aerial lifts?
Error Code: 212; Fault Message: Faulty Keyswitch. Description: Both platform and ground modes are selected simultaneously. Check: Key switch function, Check wiring to key switch function. Error Code: 221; Fault Message: Horn Permanently Selected. Description: The horn switch was closed during power-up in platform mode.
What is the DTC code on a scissor lift?
Description: The joystick signal is outside the acceptable range of 0.5V – 4.5V. Check: Center joystick and check to see if a power cycle will clear DTC. Description: The ground control box lift switch was closed up or down, during power up in ground mode.
Why does my hoist lift not raise to floor?
Lift will not lower to floor. 404. Lift lock not engaging. 501. Lift won’t raise at all. 502. Lift raises slow or won’t raise load. 503. Motor stops, blown circuit breaker when lift reaches full stroke. 504. Power unit making excessive noise.