What does code 16 mean on Honda check engine light?
If any codes are present, they will blink a sequence in the MIL to indicate a system or component failure. The MIL will blink longer to represent the first digit and then will blink short for the second (for example 1 long and 6 short would be code 16).
Where can I find the Check Engine Light code?
The codes can be read by bridging the two pins in the service connector and reading the MIL on the instrument cluster (all models). Vehicles 2000 onwards are fitted with a 16-pin diagnostic behind the centre console on the passenger side. A fault code reader is required to retrieve or clear codes via this connector.
Where is the fault code reader located on a Honda?
In order to retrieve any stored DTC’s, either a fault code reader must be connected to the vehicle’s data link connector (located above the Service Check Connector), or read from the MIL in the instrument cluster. The service check connector (2-pin) is located under the dashboard, above the passenger side kick panel.
What does code 43 mean on a GM engine?
Trouble Code 43 indicates that there may be a malfunction in the Electronic Spark Control (ESC)circuit. ESC is used to sense spark knock (pinging) and retard the timing to eliminate it. A knock sensor (located at the rear of the engine block) sends signals to an ESC module which then signals the ECM that knocking is being detected.
Where to find OBD I code on Honda Civic?
Honda Motor Corporation OBD I diagnostic trouble codes are retrieveable without any special tools by simply following the instructions here. The codes are listed for Accord or Civic models seperately when required. The codes are defined as to what system is affected. When possible we give the more commonly known OBD II component name.
What does trouble code 43 mean on a Honda Accord?
Trouble Code 43 indicates that there may be a malfunction in the Electronic Spark Control (ESC) circuit. ESC is used to sense spark knock (pinging) and retard the timing to eliminate it. A knock sensor (located at the rear of the engine block) sends signals to an ESC module which then signals the ECM that knocking is being detected.
What does a code 43 mean on a spark control?
Trouble Code 43 indicates that there may be a malfunction in the Electronic Spark Control (ESC) circuit. ESC is used to sense spark knock (pinging) and GM Code 43 Electronic Spark Control Fault Trouble Codes› GM OBD Trouble Codes› GM Code 43 CODE 43 – Electronic Spark Control Fault