What does code 1326 mean?
The P1326 code was found: The KSDS detects vibrations indicating the onset of excessive connecting rod bearing wear. It is. designed to alert the driver at an early stage of bearing wear before the occurrence of severe engine.
Where to find check engine light code on Kia?
When retrieving Kia check engine light codes with an OBD II scan tool, proceed as follows: 1. Connect scan tool to the 16-pin data link connector (DLC) located underneath the steering column. The connector may have a removable cover. 2. Turn the ignition on. 3.
What are the possible causes of a p1326 Kia?
P1326 KIA Possible Causes 1 Faulty Knock Sensor 2 Knock Sensor harness is open or shorted 3 Knock Sensor circuit poor electrical connection 4 Engine mechanical problem 5 Reprogram Engine Control Module (ECM)
What does DTC code p1326 mean on Hyundai?
At that time, Diagnostic Trouble Code (DTC) P1326, specific to the KSDS, will be recorded in the ECU. The vehicle can continue to be operated for a limited time in Limp Home Mode, but it will accelerate slowly and have a reduced maximum speed. Also, engine RPMs will be limited to approximately 1800-2000 RPM.
How to test Acura check engine light codes?
Next, read our article Automotive Circuit Testing 101, and if there is an article related to the system you are testing, such as Oxygen Sensors or EGR concerns, read these as well. They will provide valuable info! If there is a link to a specific diagnosis strategy for the code then follow that and start testing.
Where is the Check Engine light on a Kia?
This method applies only to Kia vehicles that are the model year 1996 and newer. Locate the OBD-II port under the dashboard. Plugin your scanner into the OBD-II port. Turn on the ignition. Do not start the engine. Allow the scanner to power on. Select Read Codes on your scanner. Write down all the codes that are Present or Current.
P1326 KIA Possible Causes 1 Faulty Knock Sensor 2 Knock Sensor harness is open or shorted 3 Knock Sensor circuit poor electrical connection 4 Engine mechanical problem 5 Reprogram Engine Control Module (ECM)
How can I read the Check Engine Light code?
You can read Kia check engine light codes yourself using an OBD-II scanner. This method applies only to Kia vehicles that are the model year 1996 and newer. Locate the OBD-II port under the dashboard. Plugin your scanner into the OBD-II port. Turn on the ignition. Do not start the engine.
At that time, Diagnostic Trouble Code (DTC) P1326, specific to the KSDS, will be recorded in the ECU. The vehicle can continue to be operated for a limited time in Limp Home Mode, but it will accelerate slowly and have a reduced maximum speed. Also, engine RPMs will be limited to approximately 1800-2000 RPM.