What do the belts do on a Jeep Cherokee?
Check out our partspage for coupons on new belts for your Cherokee! The belts in your Cherokee connect your engine to many of the components you use every day such as your air conditioner, battery (via the alternator), power steering and cooling system.
Can a worn belt cause a jeep to overheat?
As such, you may experience a dead battery, difficulty steering, overheating, etc. that might be due to a worn belt, not a faulty component! If your Cherokee is one of those Jeeps that shrieks horrendously when it runs, you likely have a worn belt, bad tensioner or both.
What to do if your Jeep Cherokee has a blown fuse?
2014 Jeep Cherokee Latitude 3.2L V6 Check for a blown engine fuse Odd electrical problems that come out of nowhere can often signify a blown engine fuse – check and change yours here! 2014 Jeep Cherokee Latitude 3.2L V6 Replace brights On many cars, the high beam bulb runs at reduced power during the day – check ’em and change ’em!
How often should I replace my serpentine belt?
The manufacturer recommends checking the serpentine belt every 7,500 miles or 6 months for potential replacement due to normal wear. Find the belt tensioner pulley. The tensioner pulley is generally between the crankshaft and a component toward the top of the hood area. Check the belt routing so you know how to replace the belt.
What happens when a serpentine belt is worn?
A worn or damaged serpentine belt can fail to adequately transfer the power, leaving your alternator, power steering, and air conditioning failing to function. If your serpentine belt needs to be replaced, it can be done using only common hand tools.
Where do I find the serpentine belt routing diagram?
Find the serpentine belt routing diagram. Many cars come with a sticker in the engine bay that shows exactly how the serpentine belt is supposed to be routed through the various pulleys on the engine. If your vehicle does not have a sticker, you will need to find another way to remember how the belt should be run.
How much does it cost to replace a serpentine belt on a jeep?
Know what price you should pay to get your vehicle fixed. The average cost for a Jeep Cherokee serpentine belt replacement is between $74 and $103. Labor costs are estimated between $35 and $45 while parts are priced between $39 and $58. Estimate does not include taxes and fees.
How do you replace a belt on a Jeep Grand Cherokee?
Check the belt routing so you know how to replace the belt. You may be able to find a belt routing diagram on a decal on the fan shroud or in support documentation. Otherwise, make you own sketch for reference. Rotate the belt tensioner pulley, using the wrench, to and relieve tension on the belt.
What does the serpentine belt on a sprinter do?
The serpentine belt – sometimes referred to as the fan belt, alternator belt, or accessory drive belt – is used to spin, or “drive,” several components attached to the engine. It drives the alternator that powers the electrical system and recharges the battery.
How do you change the belt on a water pump?
Use your belt routing diagram to put the new belt onto all of the pulleys. Pay close attention to the water pump pulley, as incorrect routing can cause the water pump to run backwards and overheat. Make sure the belt is correctly routed and seated on all pulleys.