What do I need to replace my radiator?
In preparation for the replacement, we will require the following tools: drain pan to capture the antifreeze from the radiator, a funnel for refilling the system, ratchet set and wrenches, screwdriver set, regular and cutting pliers, and quick disconnect tools.
What should I do if I need to replace my radiator?
Anyone who needs to replace an old radiator should be prepared for water leaks. Changing a radiator can be a messy job. Ensure you lay some towels down underneath your radiator valves. It is also a good idea to have some small tubs handy, to capture any water.
Why is it important to service your Radiator?
It is critically important to routinely service radiators for several reasons. First, electrolysis will cause mineral deposits to plate on radiator cooling channels, which will ultimately halt coolant flow. In areas with hard water–water with high mineral content–you should avoid using tap water and select factory, premixed coolant for service.
Do you need to reorient the valve on a radiator?
If this isn’t the case, you’ll need to reorient your new valves – it’s best to get a plumber to do this. If your new radiator has identical pipe centres, turn off the heating and isolate the radiator by closing off the valve at either end. There are lots of different valves for radiators.
What to do if your Radiator is leaking coolant?
Drain the coolant and flush the radiator with cold water by sticking a garden hose in both the opening at the radiator cap and underneath the radiator in the lower fluid outlet. If your radiator still leaks even after engine deposits and debris have been removed from the inside of the radiator, then replacing the entire unit is your best bet.
Anyone who needs to replace an old radiator should be prepared for water leaks. Changing a radiator can be a messy job. Ensure you lay some towels down underneath your radiator valves. It is also a good idea to have some small tubs handy, to capture any water.
What to do if your Radiator has a blockage?
Technicians approach the radiator repair process by thoroughly identifying the problem parts before suggesting component replacements or other services. If your radiator has a blockage, it may be necessary to have that part replaced with a new one to rectify the problem.
What to do if your Radiator is running hot?
Technicians can also test the overall temperature and pressure in the coolant system to confirm that your engine is running hot. Technicians approach the radiator repair process by thoroughly identifying the problem parts before suggesting component replacements or other services.
How long does it take to flush a radiator?
Without a machine, a radiator flush takes about two hours. You’ll need to allow additional time for any other services performed at the same time, such as radiator leak repair or inspection.