What causes fuel leak in Porsche 924 engine?
Possible Causes in Control Pressure Circuit; 3. Turn off ignition (detach wire on battery supply from 1979 models) after reaching “warm” control Control pressure regulator leaks, pressure and observe pressure drop on pressure Control pressure reducing valve leaks, gauge. Pressure will drop quickly at first and then become stabilized.
When did the Porsche 924 Turbo come out?
We met Art through his other 924, a time-warp original 1979 model that handily won our Best European 1960-1984 trophy at the 2009 Hemmings Motor News New England Concours d’Elegance, and which will star in an upcoming HS&EC feature story. This sports car fanatic became an inadvertent 924 booster through his purchase of that car in 2005.
What was the O2 sensor voltage on a 1982 924?
I have a 1982 924 and soldered a shielded ‘pig tail’ at the K-Jetronic control box under the dash so I could hook up a Digital Voltmeter to monitor the O2 Sensor voltage. after warm up the voltage was .75mV at idle but would vary wildly from .05 to .8 volts going down the road.
How does the fuel pump work in a 1979 Porsche?
The fuel pump (s) in cars from 1979 models can be run by supplying battery voltage to multiple-pin plug terminal 7 (red/white) with a piece of wire. The ignition need not be turned on. 5. Stop by turning valve to position 3 and measure delivery rate. Test value: 160 to 240 cc/minute.
Possible Causes in Control Pressure Circuit; 3. Turn off ignition (detach wire on battery supply from 1979 models) after reaching “warm” control Control pressure regulator leaks, pressure and observe pressure drop on pressure Control pressure reducing valve leaks, gauge. Pressure will drop quickly at first and then become stabilized.
I have a 1982 924 and soldered a shielded ‘pig tail’ at the K-Jetronic control box under the dash so I could hook up a Digital Voltmeter to monitor the O2 Sensor voltage. after warm up the voltage was .75mV at idle but would vary wildly from .05 to .8 volts going down the road.
Is there a FAQ for the 924 garage?
Welcome to the 924 Garage FAQ. This FAQ is designed to answer most of the commonly asked questions that arise about 924’s on the discussion boards and mailing lists. However, it is and will always be a work-in-progress, so please write the webmeisterwith any corrections or additions.
The fuel pump (s) in cars from 1979 models can be run by supplying battery voltage to multiple-pin plug terminal 7 (red/white) with a piece of wire. The ignition need not be turned on. 5. Stop by turning valve to position 3 and measure delivery rate. Test value: 160 to 240 cc/minute.