What causes a Mercedes C class to fail a state inspection?
If you take a Mercedes-Benz for state inspection, it is very likely to fail due to suspension issues especially if the car has over 100k miles. Broken window regulator on Mercedes C-Class. Window regulators do the hard work when you press the button to lower or close the windows.
Where was the 2003 Mercedes Benz C class last serviced?
Last serviced in Manassas, VA on 05/08/21 • Vehicle serviced • Oil and filter changed. Mileage: 127,000 miles Body Type: Coupe Color: Red Engine: 4 Cyl 2.3 L No accident or damage reported to CARFAX. Purchased on 04/07/04 and owned in MD until 06/05/21. Driven an estimated 2,576 miles/year.
How many miles does a 2003 Mercedes Benz C class drive?
1st owner drove an estimated 4,136 miles/year • 2nd owner drove an estimated 6,179 miles/year • 3rd owner drove an estimated 6,002 miles/year • 4th owner drove an estimated 0 miles/year.
What was the first Mercedes Benz to have air suspension?
The first Mercedes-Benz models that had air suspension were the S-Class W220 in 2000 and later the E-Class W211. The airmatic bags replaces the struts and shocks on your Mercedes-Benz. While it was an excellent feature added to some Mercedes-Benz models, but it was also prone to failure.
Is the 2003 Mercedes Benz C Class A good car?
Edmunds’ expert review of the Used 2003 Mercedes-Benz C-Class provides the latest look at trim-level features and specs, performance, safety, and comfort. At Edmunds we drive every car we review, performing road tests and competitor comparisons to help you find your perfect car. Read the full in-depth review of the Used 2003 C-Class at Edmunds.
When was the last serviced Mercedes Benz C class?
Last serviced in Morrow, GA on 11/14/18 • Vehicle serviced • Oil and filter changed. Mileage: 131,000 miles Body Type: Coupe Color: Red Engine: 4 Cyl 1.8 L No accident or damage reported to CARFAX.
How many miles does a Mercedes Benz C class have?
Mileage: 131,000 miles Body Type: Coupe Color: Red Engine: 4 Cyl 1.8 L No accident or damage reported to CARFAX. 1st owner purchased on 11/15/02 and owned in WA until 11/14/06 • 2nd owner purchased on 04/23/07 and owned in WA until 10/19/09 • 3rd owner purchased on 02/03/10 and owned in WA until .
Can a 2002 Mercedes Benz drive cycle be incomplete?
Also, one customer with a 2002 Mercedes was unable to complete the secondary air injection monitor until one evening he allowed his vehicle to idle for 5-20 minutes in his driveway. He then turned off his vehicle and restarted the vehicle the next morning and allowed it to idle for another 5-10 minutes.
What are the most common problems with Mercedes Benz cars?
8 Most Common Mercedes-Benz Problems 1 Rust. Rust behind license plate / trunk area. 2 Engine Mounts. Engine mounts on Mercedes-Benz cars are oil filled. 3 Suspension & Steering Components. Ball joint / front control arm. 4 Window Regulators. Broken window regulator on Mercedes C-Class. 5 AirMatic Components. …
What causes excessive cabin vibration in a Mercedes Benz?
Failed engine mounts can cause excessive cabin vibrations. Ball joint / front control arm. Ball joints, sway bar link, control arm bushings on used Mercedes-Benz wear out much sooner than you would expect. This is based on our experience with used Mercedes-Benz.
How can you tell if a Mercedes Benz is rusted out?
We still remember an older Mercedes-Benz 240D that had over 1 million miles still running strong but the floor had rusted out, and you can see the ground when sitting on the driver seat. The newer Mercedes-Benz models still have rust issues as well. Get a flashlight and carefully inspect the car. Look under the wheel wells and near the bumpers.
Are there any problems with the Mercedes Benz transmission?
But a chain can be as long as its weakest link and that philosophy applies to Mercedes-Benz transmission. While the transmission in itself is bulletproof the 13-pin connector and the valve body issues have caused a fair reputation damage to Mercedes-Benz.
Can you read the fault code on a Mercedes Benz?
Can read fault codes from multiple systems such as transmission, engine, ETS, airbag and more. Can clear fault codes. Can read and erase all fault codes on Mercedes-Benz cars. Only works on MB but can perform further troubleshooting including SBC brake systems, convertible systems, Air Conditioner (A/C) system. 3. Mercedes-Benz Star Diagnostic DAS
Is there a diagnostic scanner for Mercedes Benz?
Mercedes-Benz Star Diagnostic DAS This is diagnostic scanner used at Mercedes-Benz dealerships. Yes, it can do anything including programming of sensors and features. Any of the scanners listed above can read and clear the Check Engine / Service Engine Fault Codes.
Is there a service bulletin for a Mercedes Benz?
We located a Mercedes Benz Service Bulletin (S-B-14.00/17) that may be helpful. Also, one customer with a 2002 Mercedes was unable to complete the secondary air injection monitor until one evening he allowed his vehicle to idle for 5-20 minutes in his driveway.
Can a Mercedes-Benz have a transmission failure?
Very few Mercedes-Benz cars have had complete transmission failure and require transmission replacement. We see these transmission fail in rare cases when water enters the transmission via the oil cooling lines or the radiator on cars equipped with Valeo radiators.
What happens when a Mercedes Benz goes into limp mode?
When a Mercedes-Benz goes into limp mode, it only operates in second gear and reverse only. When you put it in gear, you may also feel a bang as transmission engages. The first thing you should try is to check the transmission fluid level. The transmission has a dipstick tube but with no dipstick in it.
What causes a Mercedes Benz to not start?
In most cases you will get a fault code related to one of the following: 1 ECM / PCM computer failure 2 Camshaft position sensor 3 Shifter Selector module 4 Fault codes related to driver authorization or immobilizer 5 Electrical problems
What are the problems with a Mercedes Benz?
Top 5 Mercedes-Benz no start problems 1 Engine Click, No Start 2 Engine Dies Right After It Starts 3 Car turns over, but it won’t start 4 The car makes a clicking noise but won’t start. Hint: Starter Problem or Low Battery 5 Key will not turn the ignition More
If you take a Mercedes-Benz for state inspection, it is very likely to fail due to suspension issues especially if the car has over 100k miles. Broken window regulator on Mercedes C-Class. Window regulators do the hard work when you press the button to lower or close the windows.
What causes a Mercedes-Benz transmission to fail?
We see these transmission fail in rare cases when water enters the transmission via the oil cooling lines or the radiator on cars equipped with Valeo radiators. The top part of the radiator on your Mercedes-Benz contains the chamber for the engine coolant/antifreeze while the bottom part contains the chamber for the transmission oil cooling.