What are the turn signals on a cougar?
Left turn signal operation: Green-Orange (LH Inner light) AND Green-White (LH Front) Right turn signal operation: Orange-Blue (RH Inner light) AND White-Blue (RH Front) All lights on but not flashing:
Why are the lights not flashing on my Cougar?
One or more lights not flashing: If all bulbs are OK, the trouble is most likely in the sequential flasher unit in the trunk. Ford has obsoleted this part but an electronic replacement is available from your parts dealer. One side flashing only: If only one side flashes, the turn signal switch in the column is most likely bad.
How does the sequencer work on a cougar?
The sequencer has electronic switches corresponding to the center, and outboard tail lights. When the turn signal switch and the brakes are applied simultaneously, the sequencer causes the turn signal to override the brake lights for the side chosen.
What to do if your turn signal is bad?
When the turn signal lever is depressed, no lights come on anywhere. Start by depressing the emergency switch, if the emergency flashers work, the turn signal switch is most likely bad. Disconnect the turn signal switch from the harness under the dash next to the steering column and check it according to Table 1.
Where is turn signal switch on Mercury Cougar XR7?
Disconnect the turn signal switch from the harness under the dash next to the steering column and check it according to Table 1. The table shows wire pairs that should be shorted together when the switch is in the position indicated. If any of the connections are open, replace the switch.
Is the turn signal switch on my Ford Cougar bad?
Ford has obsoleted this part but an electronic replacement is available from your parts dealer. If only one side flashes, the turn signal switch in the column is most likely bad. If only the front turn signal lights flash, the turn signal switch in the column is most likely bad.
One or more lights not flashing: If all bulbs are OK, the trouble is most likely in the sequential flasher unit in the trunk. Ford has obsoleted this part but an electronic replacement is available from your parts dealer. One side flashing only: If only one side flashes, the turn signal switch in the column is most likely bad.
The sequencer has electronic switches corresponding to the center, and outboard tail lights. When the turn signal switch and the brakes are applied simultaneously, the sequencer causes the turn signal to override the brake lights for the side chosen.
Which is part of the turn signal Flasher?
The most failure prone parts are the turn signal switch, the turn signal flasher can and the sequential flasher. Basically, the system works as follows: when the directional lever on the turn signal switch is depressed, it completes circuits that select and feed power to the corresponding bank of lights.
Disconnect the turn signal switch from the harness under the dash next to the steering column and check it according to Table 1. The table shows wire pairs that should be shorted together when the switch is in the position indicated. If any of the connections are open, replace the switch.
The most failure prone parts are the turn signal switch, the turn signal flasher can and the sequential flasher. Basically, the system works as follows: when the directional lever on the turn signal switch is depressed, it completes circuits that select and feed power to the corresponding bank of lights.
When do hazard lights work and when do turn signals work?
Turn signals only work when the ignition is on; hazard lights work whether the ignition is on or not. The two systems have separate power supplies, so they have separate fuses.