What are the torques on banjo fuel line?
Banjo bolt on fuel line to overflow valve 40 Nm Injection line Tightening torques Union nut for the injection line to pressure pipe connection/unit pump 25 Nm Injection nozzle combination Tightening torques Clamp piece for injection nozzle combination to cylinder head 35 Nm Thrust bolt for high pressure fuel line to cylinder head
Which is the oldest brand of banjo in the US?
This is a Vega Professional Tubaphone openback banjo, with a neck from the 1960s and the pot from a 1923 Vega Tubaphone banjo, a conversion common in the 1960s. Vega, now owned by Deering Banjos, is one of the oldest American banjo brands, founded in 1881 in Boston, Massachusetts.
What kind of wood do you use for a banjo?
Walnut is a traditional material for banjos and guitars, and was commonly found until the late 1930s when Mahogany and Maple displaced it. This is a Vega Professional Tubaphone openback banjo, with a neck from the 1960s and the pot from a 1923 Vega Tubaphone banjo, a conversion common in the 1960s.
When did the Gibson GB Banjo come out?
The first of the Gibson GB series of 6-string Mastertone Guitar Banjos appeared in 1918, as the GB-3 and GB-4. The GB-1 and GB-6 appeared in 1922, and by 1940, production had completely ended. The GB-5 was built only during 1925.
Banjo bolt on fuel line to overflow valve 40 Nm Injection line Tightening torques Union nut for the injection line to pressure pipe connection/unit pump 25 Nm Injection nozzle combination Tightening torques Clamp piece for injection nozzle combination to cylinder head 35 Nm Thrust bolt for high pressure fuel line to cylinder head
What kind of engine does a 502 / 502 have?
Component Information: Cylinder heads: The 502/502 base engine comes with fully assembled cylinder heads, Chevrolet Part Number 12363390. These cylinder heads are aluminum, oval port heads with 110cc combustion chambers, 2.25″ stainless steel intake valves, and 1.88″ stainless steel exhaust valves.
Where are the bearings located on a piston and cap?
The grooves in the rod and cap and the tangs on the bearings merely serve as an installation aid in order to align the bearings during assembly (locating upper and lower bearings correctly fore/aft). Bearings as-installed feature the ends slightly protruding beyond the parting line.
How much torque does a 35 nm crankcase have?
Filler cap bolt at TDC inspection hole to timing case 25 Nm Main oil duct end plugs Tightening torques End plug to cylinder crankcase M14x1.5 35 Nm End plug to cylinder crankcase M16x1.5 35 Nm End plug to cylinder crankcase M18x1.5 40 Nm End plug to cylinder crankcase M20x1.5 50 Nm Cylinder head cover Tightening torques
Component Information: Cylinder heads: The 502/502 base engine comes with fully assembled cylinder heads, Chevrolet Part Number 12363390. These cylinder heads are aluminum, oval port heads with 110cc combustion chambers, 2.25″ stainless steel intake valves, and 1.88″ stainless steel exhaust valves.
Filler cap bolt at TDC inspection hole to timing case 25 Nm Main oil duct end plugs Tightening torques End plug to cylinder crankcase M14x1.5 35 Nm End plug to cylinder crankcase M16x1.5 35 Nm End plug to cylinder crankcase M18x1.5 40 Nm End plug to cylinder crankcase M20x1.5 50 Nm Cylinder head cover Tightening torques