What are the torque specifications for a General Motors truck?

TORQUE SPECIFICATIONS GENERAL MOTORS APPLICATION FT-LBS / ( N-m) AXLE SHAFT FLANGE BOLT ‘S’ BODY CAR 27 (37) TRUCKS 60 (82) AXLE SPINDLE NUT ‘A’ BODY 192 (261) ‘C’ ‘E’ ‘H’ & ‘K’ BODIES 180 (245) ‘J’ & ‘L’ BODIES 191 (260) ‘P’ BODY 200 (271) ‘S’ BODY CAR 137 (186) ‘T’ SERIES TRUCK

How much torque does a Duramax wheel hub have?

Chassis Torque Specs Wheel Hub Assembly to Knuckle Bolts 133 lb ft Lower Ball Joint Nut 74 lb ft Upper Ball Joint Nut 37 lb ft Tie Rod End 46 lb ft Brake Caliper Bolts 80 lb ft Brake Caliper Bracket Bolts (to knuckle) 221 lb ft Lug Nuts 140 lb ft ABS Sensor Mounting Bolt 13 lb ft 18 N m Axle Nut 177 lb ft 240 N m Brake Hose Clip 106 lb in 12 N m

What are the suspension specifications for a Chevy truck?

Model C-10 CP-20-30 K – All G-30 Lower Control Arm Bushing Steel §§ New 280 Used 115 —– New 280 Used 115 Upper Ball Joint Nut * 50 ** 90 **100 **90 Lower Ball Joint Nut **90 **90 ***80 *90 Nut, Spindle To Knuckle —– —– 65 —–

What is the torque of a hub nut?

First design nut (Pac-style nut painted black) 284 ft-lbs/385 Nm;second design nut (solid gray nut), 173 ft-lbs/235 Nm. [5] Tighten nut to specified value and tighten further to align cotter pin with hole. [6] Install and tighten new front axle wheel end nut to specification in a continuous rotation.

How much torque does a GMC wheel hub have?

GM and Chevrolet Truck Torque Specifications. Truck wheel hub torque specifications also vary greatly, with the majority of torque requirements for both GMC and Chevrolet trucks between the 155 to 180 foot-pound range. Variations in the drive system type can make for marked torque differences.

What kind of torque does a GMC Jimmy need?

For example, 1995 to 1997 GMC Jimmys require 180 foot-pounds of torque, but the wheel hubs on 1997 to 2001 Jimmy four-wheel drive models require 103 foot-pounds of torque. A native of New Haven, Conn., Floyd Drake III began writing in 1984.

Where is the torque on a GM wheel?

Proper torque specifications for individual GM models should be obtained from their specific service manuals, or torque specification listing. A wheel hub holds the wheel onto the vehicle and the hub bearing, located at the spindle of the wheel hub, allows it to spin freely.

What’s the torque on a Chevy S10 2.2?

**Third picture is for the tightening sequence of Cylinder head bolts on 1996+Newer models. What is the torque value on the tensioner bolt on a 98 s10 2.2?

What are the torque specifications for a Vortec engine?

44.74 Vortec – Engine Mount Bracket to Frame Bolts Type: Bolt 32 384 43.39 Vortec – Connecting Rod Cap Nuts Type: 38 456 51.52 Vortec – Connecting Rod Cap Nuts Type: 46 552 62.37 Vortec – Torque Converter Cover Bolts Type: Bolt

What should the torque be on an intake manifold?

The bolt numbering is the sequence in which they should be tightened. The first time around, torque these bolts to 25 foot-pounds, then move up to 45 foot-pounds and finally 65 foot-pounds. The intake manifold has 12 bolts that must be torqued in two steps with different sequences. Both steps require a torque setting of 35 foot-pounds.

What are the torque specifications for a GMC Sonoma?

50.17 Gen II – Lower Transmission Brace Bolts Type: Bolt Head: Hexagon Bracket/Stay To Transmission 41 492 55.59 Gen II – Transmission Brace Nuts Type: Bracket/Stay To Transmission 66 792 89.48 Gen II – Upper Transmission Brace Bolts Type: Bolt Head: Hexagon 37 444 50.17 Gen II – Transmission Brace to Engine Bolts – S4 Engine Type: Bolt 35 420

What are the torque specifications for a GM 4.3L V6?

81 972 109.82 Vortec – Main Bearing Cap Bolts Type: Bolt 77 924 104.4 Vortec – Main Bearing Cap Bolts Type: Bolt 15 180 20.34 Vortec – Main Bearing Cap Bolts – 2 Steps: 15 FtLbs; +75degs Type: Bolt Crankshaft Position Sensor To Engine Block 8 96 10.85 Type: Bolt Crankshaft Position Sensor To Engine Block 15 180 20.34 Type: Bolt

How much torque do you put on a General Motors car?

Tighten to 8 ft-lbs (10 N-m), then tighten an additional 1/3 turn to at least 37 ft-lbs (50 N-M). Upon initial installation of replacement ball joint, tighten nut to to 81 ft-lbs (110 N-m). 2. Tighten to 8 ft-lbs (10 N-m), then tighten an additional 1/3 turn to at least 48 ft-lbs (65 N-m). 3.

What are the torque specs on a Pontiac?

Pontiac Engine Torque Specs Bolts or Parts Lube or Sealer Torque to: Rocker Studs (screw-in) Engine Oil 55 ft-lbs. Rocker Arm Nuts (Non-Adjustable Rockers) Assembly Lube 20 ft-lbs. Oil Pump Bolts Engine Oil 30 ft-lbs. Oil Pump Cover Bolts Engine Oil 15 ft-lbs.

Is the connecting rod bearing torque to yield?

Haynes states that the connecting rod bolts are torque to yield for the main bearing bolts; however, it is not clear if the connecting rod bolts are torque to yield also. Does anyone know if the connecting rod bolts are reusable or do they have to be replaced?

How much torque does a hub bearing have?

Hub Bearing Torque Specification Guide 2010 Make year Model Front torque ft-lbs/Nm Rear torque ft-lbs/Nm

Where can I find the latest torque specs?

Find the most up-to-date torque spec listings in electronic format. FelPro-Only.com is your convenient source for advanced sealing information. It’s the place to learn and share “tricks of the trade,” find proper diagnosis and installation instructions, and enjoy easy access to parts reference.

Navigation