What are the timing marks on a cam?
Normally the chain link will have three marks on it. Like two yellow and an orange. The cam and crank sprockets will have a mark on them where the color links will go on. Unfortunately since your vehicle is a 2015 the manufacture has not released any information for that repair. If the timing is not set properly you will damage the valves.
Where is the timing mark supposed to line up?
Is the mark supposed to line up with the arrows on the cam sleeves or just to the left of it (with the front cam timed looking through the hole to see red dot, the mark on the sprocket side is just off to the side of the cam sleeve arrows) have the same problem?
How do you find timing marks on a crankshaft?
Locate the micro phone close to the center of belt span (T1, T2) and bounce the belt by finger 2 – 3 times. Read a value on the display. Turn the crankshaft two turns in the operating direction (clockwise) and realign crankshaft sprocket and camshaft sprocket timing mark. Install the timing belt lower cover (A) with 5bolts (B).
How do you put timing marks on a car?
Install the crankshaft sprocket (A). Align the timing marks of the camshaft sprocket (A) and crankshaft sprocket (B) with the No.1 piston placed at top dead center and its compression stroke. Install the idler pulley (A) and tighten the bolt (B) to the specified torque. Temporarily install the timing belt tensioner (A).
Where is the timing mark on a camshaft?
Turn the crankshaft pulley, and align its groove with timing mark “T” of the timing belt cover. Check that the timing mark of camshaft sprocket is aligned with the timing mark of cylinder head cover. (No.1 cylinder compression TDC position) Remove the crankshaft pulley bolt and crankshaft pulley (A).
Is the mark supposed to line up with the arrows on the cam sleeves or just to the left of it (with the front cam timed looking through the hole to see red dot, the mark on the sprocket side is just off to the side of the cam sleeve arrows) have the same problem?
Locate the micro phone close to the center of belt span (T1, T2) and bounce the belt by finger 2 – 3 times. Read a value on the display. Turn the crankshaft two turns in the operating direction (clockwise) and realign crankshaft sprocket and camshaft sprocket timing mark. Install the timing belt lower cover (A) with 5bolts (B).
How many links are in a timing belt?
Counting the colored links there are seven links. I count 8 on mine and 8 on the head that I removed. When I use the colored links to the alignment marks the exhaust cam doesn’t line up for the timing belt mark at the other end. helpful?