What are the problems with my 2004 ion2?
Need some confirmation. Having intermittent starting problems with my 2004 ION2. Insert key, turn on, lights come on but no turnover. Sit a few minutes, turn on, tries to start but dies as if no gas, or get a turnover and that’s it. Sit another couple of minutes, turn on, lights, no turnover.
What happens if you have a bad solenoid or starter?
Solenoid or Starter. If the problem is a bad alternator, your car will slowly lose power. You’ll be driving down the road, your lights will dim, and you’ll lose power and die. If the problem is with your battery, then you’ll generally only have trouble starting your car since that’s the battery’s main function.
How can I tell if my car starter has failed?
Signs the Starter has Failed: A broken starter will make a clicking sound when you turn the key. The car won’t start, but the dash lights are on. Jump starting your car or truck does not turn over the engine at all.
Why does my starter turn over with the key?
If it turns over with the key, the switch is either bad or wired incorrectly. Solution #6: Confirm that you purchased a starter designed to work with your engine’s compression ratio. Engines with 11:1 or higher compression generally require a high-torque, gear-reduction starter. Otherwise, the engine will turn over slowly.
Why was the TV show my Three Sons filmed out of sequence?
At Fred MacMurray ‘s insistence, all episodes were filmed out of sequence during the show’s entire run using a technique now known as the MacMurray method. MacMurray would do all of his scenes in 65 nonconsecutive days. The cast regulars got haircuts once a week in order to maintain continuity.
How to troubleshoot the air conditioning in a Saturn Ion?
Pull on the accessory trim plate to release the retaining fasteners to get to the control panel. Disconnect the electrical connector. Remove the screws from the radio and pull the radio out. Disconnect the radio electrical connectors and remove the radio.
When does a solenoid need to be replaced?
Starter – Some solenoids are mounted to the starter, but some are located directly inside the starter housing. When this is the case, it may be necessary to replace the entire starter when the solenoid goes bad. Sometimes the starter itself is the problem. Electrical issues can be annoying and inconvenient.
Need some confirmation. Having intermittent starting problems with my 2004 ION2. Insert key, turn on, lights come on but no turnover. Sit a few minutes, turn on, tries to start but dies as if no gas, or get a turnover and that’s it. Sit another couple of minutes, turn on, lights, no turnover.
How does the ignition lock work on a Saturn?
The ignition switch sends a code that is generated in the ignition lock to the body control module (BCM). It is a part of the Passlock2 system on the 2004 Saturn. The Passlock system is intended to prevent a worn (worn keys use to be about to start any of the earlier model Saturns without any security system) or incorrect key from starting the car.
Why is my car not turning on when I Turn on the ignition?
Of course, if you access the car itself with your key, you likely won’t be able to turn on the ignition because of all those extra tumblers. And on the off chance that you do turn the ignition cylinder, the immobilizer won’t allow you to start the car, because it’s protected by one-in-millions of transponder codes.
What happens if you have an ignition switch problem?
However, if your car has ignition switch problems, you may not be able to start the car at all. Ignition switch problems can also cause issues on the road, such as unexpected shutdowns or electrical problems. To be sure, ignition switch problems are no fun, especially if they’re stopping you from getting to work or school or play.
However, if your car has ignition switch problems, you may not be able to start the car at all. Ignition switch problems can also cause issues on the road, such as unexpected shutdowns or electrical problems. To be sure, ignition switch problems are no fun, especially if they’re stopping you from getting to work or school or play.
What happens if you have an incorrect ignition code?
The chip in the key transmits a specific code, of which there are millions. If this code matches the ones programmed into the vehicle, engine starting is enabled. An incorrect key code, such as from an unprogrammed key or damaged key, would prevent engine starting. Code “confusion,” such as having multiple keys can also occur, preventing ignition.
How often should you insert and remove the ignition key?
You may insert and remove the ignition key thousands of times every year, wearing the key and tumblers ever-so-slightly every time. Heavy keychains can add more stress to the ignition cylinder, increasing wear. After a while, the key may fall out of the cylinder or be unable to turn out of the lock position.
Of course, if you access the car itself with your key, you likely won’t be able to turn on the ignition because of all those extra tumblers. And on the off chance that you do turn the ignition cylinder, the immobilizer won’t allow you to start the car, because it’s protected by one-in-millions of transponder codes.
Where is the ignition switch on a Saturn?
The problem was due to the original ignition switch which is a $50 part from Saturn. The ignition switch is located on the back end of the ignition lock. The ignition switch sends a code that is generated in the ignition lock to the body control module (BCM). It is a part of the Passlock2 system on the 2004 Saturn.
What does the PassLock system on a Saturn do?
The Passlock system is intended to prevent a worn (worn keys use to be about to start any of the earlier model Saturns without any security system) or incorrect key from starting the car. If the proper code is not sent then the BCM will shut down the car for up to 10 minutes.
How did Dr.Dre’s son Andre die?
The son of hip-hop producer Dr. Dre died over the weekend, the music star’s rep confirmed to PEOPLE. Andre Young Jr., 20, was discovered “unresponsive” by his mother at his home in Woodland Hills, Calif., on Saturday morning, according to the L.A. County Coroner’s office.
How old was Eric Clapton’s son when he died?
Eric Clapton’s Son Killed in Fall from 53rd Floor Window. NEW YORK (AP) _ The 4 1/2 -year-old son of rock guitarist Eric Clapton died Wednesday after he fell out the window of a 53rd-floor apartment, police said. Conor Clapton fell shortly after 11 a.m. and landed on the roof of a four- story building next door, according to Officer Kim Royster.
Who are the children that were injured in the car accident?
Two children — one riding in each vehicle — were injured: the Halls’ granddaughter, 8-year-old Amber Jackson, and Wentworth’s nephew, Frankie Whaley, 12. Amber was released from a hospital Monday. Frankie remained hospitalized in special care, said Sgt. WillRogers.
What to do if your car key wont turn in the ignition?
As long as you can get your key out when your car key won’t turn in the ignition, you should be able to investigate the car key. Try a spare car key, and see if a different key will work. Compare the car key that won’t turn in the ignition. Look at the bitting on the blade of the key for any wear. Examine for any twists, bends, or breaks.
How do you change the ignition on a car?
Find the locking pin on your ignition assembly. Use a tool of the correct size to depress the lock pin. Pull the old ignition cylinder lose. You might need to shake the ignition cylinder loose or finesse it out of its housing. Insert your new key into the new ignition cylinder. Fit the new ignition cylinder into the housing.
The problem was due to the original ignition switch which is a $50 part from Saturn. The ignition switch is located on the back end of the ignition lock. The ignition switch sends a code that is generated in the ignition lock to the body control module (BCM). It is a part of the Passlock2 system on the 2004 Saturn.
Why do I have the wrong key in my ignition?
Sometimes it’s a simple mistake, and the wrong key is inserted into the cylinder. This happens most often when someone has more than one car key on their key ring. Many keys look similar, especially if they are from the same make. So double check the correct key is being used to try to start the vehicle.
What happens when the ignition switch is off?
Generally speaking, in the “OFF” position, the ignition switch doesn’t connect anything; in the “ACC” position, the radio or fan may be energized; in the “RUN” position, the engine control module is energized; and finally, in the “START” position, the starter relay is engaged. (These generalizations, depend significantly on year, make, and model.)
The Passlock system is intended to prevent a worn (worn keys use to be about to start any of the earlier model Saturns without any security system) or incorrect key from starting the car. If the proper code is not sent then the BCM will shut down the car for up to 10 minutes.
Can a bad coolant sensor cause a car to not start?
Some cars use the engine coolant temperature sensor to control the electric cooling fans. You have two separate temperature sensors for the fans, dashboard gauge, and engine management in most cars. However, if your car has a single sensor, a bad engine coolant temperature sensor may result in your fans won’t start at all.
What should the temp of the coolant sensor be?
Check that the temperature value of the CTS is around 80-90c when the engine is hot. A lot of engine coolant temperature sensors have two wires and the sensor is controlled by Ohm. Get a wiring diagram and find out what ohms you should have at a specific temperature to check the function.
What is the rating of the cold start injector?
Average rating from 141 customers who received a Car is hard to start Inspection. The cold start injector, also referred to as the cold start valve, is an engine management component found on many road going vehicles.
What do you call the cold start valve?
The cold start injector, also referred to as the cold start valve, is an engine management component found on many road going vehicles.
How many days are there in the year 2003?
Red –Federal Holidays and Sundays. Gray –Typical Non-working Days. Black–Other Days. Local holidays are not listed. The year 2003 is a common year, with 365 days in total.
How long should I drive during an OBD?
Drive for at least 10 minutes at highway speeds (55 mph or more) 4. Drive for at least 20 minutes in urban traffic with at least 4 idle periods For additional OBD and drive cycle information, Check your vehicle’s owner’s manual, contact your local dealership or search the Internet.