What are the green black and orange ports?

What are the green black and orange ports?

Traditionally, orange, green and black TRS cables are used in 5.1-channel audio applications. The orange cable carries the center and subwoofer channels, the green cable carries the front left and right channels and the black cable carries the rear left and right channels.

How do I connect my 5.1 surround sound to my computer?

Connect the sound cable with black connectors into the Rear Speaker Out port on the back of the computer. Plug the other end of the cable into the black port on the subwoofer, next to the green port. Connect the sound cable with orange connectors into the orange Center or Digital Out port on the back of the computer.

What color wires are speaker wires?

The color codes for the four-conductor wire for speaker one are Red (positive), Black (negative), and White or Yellow (positive), Green (negative).

What is the green audio jack called?

Line Out
Mic in is a microphone level input. Line Out (Green) goes to your speakers or headphones (whichever one you use).

Can my laptop output 5.1 audio?

Your monitor or TV would probably have to be connected to the surround system so just speakers won’t work. Optical audio out is very rare on laptops and 5.1 analog audio out is never available on laptops.

Can I connect my home theater to my computer?

If your PC provides HDMI, connect it to one of the HDMI inputs on your TV or Home Theater Receiver. If your PC has a digital optical audio output, you can connect it to a digital optical input on a home theater receiver.

Can I use TRS instead of TS?

If you plug a TRS cable into a TS jack, it can produce an unbalanced audio signal. The durability of the TRS cable may also be compromised, and the connection may be unreliable or of lower quality. Read on for an in-depth discussion on substituting a TS cable for a TRS cable comes with the above limitations.

Is TRS the same as aux?

Are AUX (Auxiliary) connectors & headphone jacks the same? The construction of the aux connector and the headphone jack is often the same: 3.5mm (1/8″) TRS. However, the “auxiliary connector” is universal for audio while the “headphone jack” is, by its name, suited for headphones.

Is Green Cable Positive or negative?

Recognize that the black wire is the positive one, the white wire is the negative one, and the green wire is the ground. You may see a copper wire instead of a green wire for the ground.

What is positive green or yellow?

The protective ground is green or green with yellow stripe. The neutral is white, the hot (live or active) single phase wires are black , and red in the case of a second active. Three-phase lines are red, black, and blue.

What is the Green and yellow wire?

Yellow – The yellow wire connects to your compressor. Green – The green wire connects to the fan. Orange – This wire connects to your heat pump (if you have one). Red – Now, there can be two separate wires for this. One is for cool and the other is for heat, hence the abbreviation “RH” and “RC”.

What are green blue and red cables for?

Red, green and blue cables are most commonly used for component video. The green connector normally connects to the green socket on the sending device (DVD player or STB ) and to the green socket of the display device (screen or projector). The “green” channel is normally labelled “Y”, as it is carrying the luma (black and white picture information).

Is the video cable yellow?

The most common type of video cable is called composite video. A composite video cable consists of one yellow RCA connector that’s usually bundled with red and white RCA analog audio cables. It’s called composite video because all of the video information — color, brightness and sync — is composited, or squeezed, onto one cable [source: Miller ].