Is there no bus, no gauges possible solution?
I’d like to offer my solution to the frustrating “no bus and no gauges” problem that I see is pretty common. I have a 2000 ram 1500 2X with the 5.9 automatic, however I believe that this is applies to all gen2 trucks regardless of drivetrain or engine type.
What kind of truck has no bus gauges?
I have a 2000 ram 1500 2X with the 5.9 automatic, however I believe that this is applies to all gen2 trucks regardless of drivetrain or engine type. My Story… See the end to get straight to my find. I’ve had my gauges go out with the “no bus’ message in the odometer window three times now!
What does no bus mean on a computer?
Any computer, wiring, or connections can cause this. You need a scan tool to diagnose. “no bus” means the PCM (computer or module) is not able to communicate. Could be something as simple as a fuse (.50) or as complicated as a bad PCM ($1000.00) “NO BUS” means that the communication system between the computers has stopped working.
What does no bus mean on a Dodge Ram 1500?
“NO BUS” means that the communication system between the computers has stopped working. HELLO: I HAVE THE SAME PROBLEM WITH MY 2001 Dodge RAM 1500 PICKUP. THE DEALER WANTS 85 DOLLARS AN HOUR TO FIGURE IT OUT. Hi I have a 2000 Ram 1500 that had the same problem.
Why is my odometer and speedometer not working?
The speedomerter, odometer & mileage guages are not working. Have not experienced any other symptoms. Brakes are operating properly, have not received any warning/service lights other than tires need rotating. Was told by a mechanic that it’s the ABS System Sensor and was given the quote for a used one for $500 plus. Can you advise on this?
I’d like to offer my solution to the frustrating “no bus and no gauges” problem that I see is pretty common. I have a 2000 ram 1500 2X with the 5.9 automatic, however I believe that this is applies to all gen2 trucks regardless of drivetrain or engine type.
I have a 2000 ram 1500 2X with the 5.9 automatic, however I believe that this is applies to all gen2 trucks regardless of drivetrain or engine type. My Story… See the end to get straight to my find. I’ve had my gauges go out with the “no bus’ message in the odometer window three times now!
What does no bus mean on Dodge Dakota?
I’ve got “no bus” showing where my odometer mileage is supposed to be, erratic gauges, no stereo, no compass, and every warning light in the info center is on, including the airbag light. Is my computer going bye-bye?
What should I do if my gauges go out?
I’ve had my gauges go out with the “no bus’ message in the odometer window three times now! Checked all the fused, disconnected the battery, to no avail…..Sound firmilliar?
Why did they change the odometer to digital?
On others, the speedometer cable was designed to count the miles up whether the cable was turned in the forward or reverse direction. And finally, odometers were almost completely changed to digital readouts, which were thought to be foolproof. With advances in technology, access to information is astounding.
How can I tell if my odometer has been replaced?
Step 3: Check for an odometer replacement sticker. If the odometer was faulty and replaced at some point in the vehicle’s history, it is legally required that the odometer reading be recorded on a decal that is displayed on the vehicle.
What causes the No Bus message on the odometer?
Symptom: Engine will not start. Gauges are inoperative. “No BUS” message displayed on odometer. Problem 1 of 2: The 5v power supply from the Powertrain Control Module (PCM) is shorted due to a shorted Crankshaft Position (CKP) Sensor.
On others, the speedometer cable was designed to count the miles up whether the cable was turned in the forward or reverse direction. And finally, odometers were almost completely changed to digital readouts, which were thought to be foolproof. With advances in technology, access to information is astounding.
Why does my Dodge Ram not have an odometer?
If all that checks out unplug the following sensors: Cranks sensor, Cam/SYNC sensor, TPS, MAP and Trans connector. These 5v sensors can short out the CCD bus because they share the same power source. You will have to cycle the key off and on to reset the PCM and CCD bus once you find the problem.
What does it mean when your gauges go crazy?
YOU MAY GO BACK LATER AND IT WILL START. GAUGES GO CRAZY. WILL COME ON. ODOMETER AND CLOCK WILL FLASH. SOMETIMES SPEEDOMETER WILL GO FROM 60 TO ZERO AND BACK. WILL NOT LOSE POWER THOUGH. YOU CAN HAVE KEY OFF AND SOMETIMES GAUGES WILL TWITCH.
When does the check gauge light come on?
The Check Gauges light will only come on after it’s hit third gear and has been running in it for a least 10 seconds. I tested this for about 5 minutes riding around my neighborhood in 1st and 2nd trying to keep it under 3rd. Once I hit the main streets, the light came on within 10-15 seconds. I tried this twice.
Do you need scanner to read airbag trouble codes?
Working with your airbag system is crucial, and therefore, always read the trouble codes with an OBD2 scanner to get an idea of where to start your troubleshooting. Do never clear the trouble codes before you fix the problem caused by the airbag light.
When to remove the airbag light without a scanner?
This is the first airbag light you should check when you want to remove the airbag light without a scanner. If the light is functioning well, it should turn on when someone occupies the passenger seat. You can have the set removed and a new pad put in place, or you can bypass the occupancy sensor and install affordable plug and play kits.
What does it mean when my ” check gauges ” light comes on?
Her mechanical career has spanned 41 years working on everything from Porsches to Heavy Equipment to including classic vehicles which she owns several and has personally restored in a world dominated by men. What Does It Mean When My “Check Gauges” Light Comes On?
Why does my Dodge truck have no gauges?
Fortunately when I finally broke down out of utter frustration and took it to the dealer to have it repaired the first time it didn’t cost me an arm. $108 later the service guy said it was a loose wire connection in the PDC.
What causes the cluster gauges to stop working?
In one of the youtube videos I watched, the guy mentioned that there are also three small surface mount resistors that control power to the entire cluster, and his were causing the entire gauge cluster to go dead. He reflowed them and corrected the issue. I had a issue pretty similar to this as well.
I’ve had my gauges go out with the “no bus’ message in the odometer window three times now! Checked all the fused, disconnected the battery, to no avail…..Sound firmilliar?
Fortunately when I finally broke down out of utter frustration and took it to the dealer to have it repaired the first time it didn’t cost me an arm. $108 later the service guy said it was a loose wire connection in the PDC.
Why is my no bus odometer not working?
This ‘bus’ is the 2 wire communication network that all the computers share information on. Your instrument cluster isn’t gettin any info over the bus that’s why you get the ‘no bus’ message and none of your gauges work. This can be caused by any shorted module or broken bus wire. A few PCM sensors can cause this problem too.
What does it mean when your truck says no bus?
The “NO BUS” points to PCM communication failure. If a code scanner cant communicate with the PCM then you have a fault with either the harness connecting the PCM to the truck or the PCM is fried.
What kind of pressure gauge does noshok use?
NOSHOK compact Fractional Sanitary Gauges and Heavy-Duty Sanitary Gauges are designed to stringent sanitary requirements including 3A and ASME BPE 2009. They are designed for clean or steam in place (C.I.P, S.I.P) and Autoclave (only dry gauges are recommended for Autoclave).
Why does my Chev Silverado have no tach?
2003 Chev Silverado. All instrument cluster gauges quit today. No speedo, tach, fuel ,temp, oil etc. Never any problem 2003 chevy: All instrument cluster gauges quit today..speedo..tach… My oil pressure, fuel, coolant temp, and battery voltage gauge don’t work. My Speedo and tach work fine. I also have a battery and abs light on.