Is there an exterior brake light warning light?
Hi: For a second time I get an exterior bulb warning light but it seems that all the bulbs work, although I can’t verify if it’s the panic brake light bulbs, or for that matter, something in the trailer harness wiring (I have the factory version).
What to do when your brake light flickers?
While a helper holds down on the brake pedal move the bulb around slightly in the socket. If the bulb flickers replace or repair the socket. Also wiggle the wiring to check for opening wiring circuits.
Why are the brake lights on my trailer not working?
Running jumper wires from the light grounds to the main trailer connector ground can help. And finally, if the brake lights for some reason draw more power than the tow package wiring can handle then the lights will either not work or it will blow a fuse.
What to do when your brake light has no power?
This portion of the guide is to help you test for power when one, both lower or all three brake lights have no power. Test the Fuses: Use the owners manual or the lid of the fuse panel to find the brake light fuse. Then use a test light to check the fuses for the brake light and BCM fuses and replace if any are blown.
What kind of bulb does a Zafira brake light need?
Just checked my bulb listing and it says you need a 380 type bulb for the brake lights on the Zafira. They are 21w for the brake and 5w for the sidelight (twin filament). A faulty bulb, incorrect bulb or a bulb forced in the wrong way round may well be the answer. inserted correctly, but still same problem.
Why are the rear lights on my Vauxhall Zafira not working?
I then realised the rear lights are also not working (same bulbs) as I said everything else is fine, all front lights, hazards all round, fog light and reverse lights. Any ideas as I’m a bit stuck with this, no fault codes are stored just in case it’s in any way relevant.
Why are the brake lights not working but the tail lights are?
Blown out light bulbs are the most common reason for why the brake lights not working but the tail lights are. Remove the screws from the bulb lens (which you can access through the trunk or see your vehicle repair manual to get the exact location). Push the bulbs and turn them counterclockwise to remove from the socket.
Why does my brake light only work on one side?
Since the problem is only on one side, you can rule out the fuse and other parts of the circuit that are shared by both bulbs. I would look closely at the connector for the nonfunctional bulb, as it may be damaged or corroded. If the bulb looks OK, you’ll want to test for power and ground at the bulb.
Blown out light bulbs are the most common reason for why the brake lights not working but the tail lights are. Remove the screws from the bulb lens (which you can access through the trunk or see your vehicle repair manual to get the exact location). Push the bulbs and turn them counterclockwise to remove from the socket.
What happens if your brake light is burnt out?
If there are no other brake lights on, your car is safe to drive and your problem has been solved. On some vehicles, if a brake light is burnt out, a warning message for that bulb will be displayed on the dash.
Do you need to change the brake light?
Think of how much time you spend with your foot on the brake, and then consider that the bulb has to be illuminated during that entire period. Newer models have switched to LED lights that last much longer, but older vehicles still feature bulbs that need to be popped out and replaced.
Hi: For a second time I get an exterior bulb warning light but it seems that all the bulbs work, although I can’t verify if it’s the panic brake light bulbs, or for that matter, something in the trailer harness wiring (I have the factory version).
What makes blinking brake lights stand out on the road?
Stand out on the road with our robust catalog of blinking brake light bulbs. Super Bright, long-lasting and better light quality than regular break lights. We have built our reputation for high-quality products, exceptional performance and strong customer service.
What to do if your brake light is burnt out?
If a brake light is burnt out, replace it with a new bulb of the same type. If you are not comfortable doing this on your own, you can have a certified technician from YourMechanic perform a brake bulb replacement for you. Step 3: Check the brake lights again to verify they are working properly.