Is the Nissan Juke stop start?
Start Stop technology operation This technology aims to limit the fuel consumption of your Nissan Juke and to preserve the environment by limiting CO2 emissions. The promise of start and stop on your vehicle is to save you between 5% and 15% in fuel consumption.
Why does my car not start when I press the brake pedal?
You may have a problem with the master cylinder or with the brake pedal assembly itself. The brake pedal needs to be pushed to start the vehicle, so if the brake pedal assembly is faulty, it will not send a signal to the computer telling it that the brake is on and its safe to start.
Why does my car have a brake to start feature?
On most cars pumping the brake pedal while the car is off builds up pressure in the line and that pressure doesn’t release until the car is started. I’m not sure if anything is different with this car because of the brake to start feature but I can’t imagine that would make a difference.
Do you push the brake all the way?
Whether the brake is depress all the way or not the car knows when you are pushing on the brake. i had the same situation when my battery was almost dead from being in Acc. the lights and everything worked but the car wouldnt start and the beeper was a very dull low sound. get a jump and try to start it.
Why are my brake lights not coming on?
So if your brake lights are still coming on then the switch is working and it’s probably the battery. If the brake lights aren’t coming on then its most likely the brake switch (cheap part that several have had to replace). I have a 2007 altima 2.s w/ 60,000 miles on it.
Why does my car not start when I press the brake?
The ikey uses the brake switch to tell if you’re pressing the brake when trying to start the car. So if your brake lights are still coming on then the switch is working and it’s probably the battery. If the brake lights aren’t coming on then its most likely the brake switch (cheap part that several have had to replace).
What’s the problem with my Juke SL AWD?
I own a 2012 Juke SL AWD CVT, no problems with it up to 35oo miles/ 6mo. Have had same 2 incidents with it in the last 1 mo that worry me. Car starts in parking garage, break pedal depresses easily, engine starts right away. have to stop 20ft away as I realize I forgot wallet home. When back in 3 min, ENGINE WON’T START.
What to do if your brake switch won’t work?
If the car starts that confirms its either the brake switch or the fact you can’t push the peddle down. You also may be able to push the switch in with your finger or a screw driver and that will tell you if it’s the switch or peddle.
Why does the brake pedal won’t go down?
Upon further inspection, it appears the master cylinder on the brake was leaking. This could be the issue……….overnight fluid seeps in and makes the brake impossible to push. After some pumps and turning the car ON, the pressure is returned to normal and the car will start.