Is K24A a VTEC?
K24A is based on an aluminum cylinder block with cast iron liners; its deck height is 231.7 mm. The cylinder block is covered by a 16-valve i-VTEC DOHC head. Here the i-VTEC system works only for the intake camshaft, it has two cam lobes and is tuned for saving fuel and low exhaust emissions.
Can a Civic Si be swapped for a JDM K24A?
Sharing the same intake manifold mounting pattern, coolant passage design, and many core part designs allows it to be transformed into a powerplant for the 8th gen Civic Si that maintains stock hoses, intake, wire harness, and exhaust. A perfect Honda coincidence.
Which is the best engine swap for a Honda Civic?
Some of the best and most impressive power upgrades include engine swaps, so rather than spending money on tuning up your engine see which of the following engines will help you to reach your power goals. – Best swap for a Civic at the time of writing as it’s well supported and gives a great power boost.
Can you swap Honda Civic es for K20?
Or you can build your own using your B-series outer CVs and K-series inner CVs and shafts, but you’ll need to swap the shaft from the driver’s side to the passenger side and vice versa for correct lengths. Im swapping my civic ES with a K24. Mix it with a dc5 6speed gearbox and head.
Can you swap a Honda Integra for a Honda K20?
And one of the best bang for the buck modifications that can be done is a K-Swap. For me, there’s no better engine to shoehorn into an older Integra or Civic then a K20 or K24. It’s power potential is practically limitless ( your funds will be the limiting factor ) while it’s reliability is amongst the best.
Sharing the same intake manifold mounting pattern, coolant passage design, and many core part designs allows it to be transformed into a powerplant for the 8th gen Civic Si that maintains stock hoses, intake, wire harness, and exhaust. A perfect Honda coincidence.
Or you can build your own using your B-series outer CVs and K-series inner CVs and shafts, but you’ll need to swap the shaft from the driver’s side to the passenger side and vice versa for correct lengths. Im swapping my civic ES with a K24. Mix it with a dc5 6speed gearbox and head.
Can a Honda K20 be swapped for a K24?
Odds are you’ll have no problems with either so the decision is yours. One of the other key components to the swap is the shifter and linkage. You can choose to use the OEM RSX unit but if your engine/trans didn’t come with it the other solution is to gett an aftermarket one.
And one of the best bang for the buck modifications that can be done is a K-Swap. For me, there’s no better engine to shoehorn into an older Integra or Civic then a K20 or K24. It’s power potential is practically limitless ( your funds will be the limiting factor ) while it’s reliability is amongst the best.