How to troubleshoot a Mercedes Benz with a brake light?

Park your vehicle and set the emergency brake. Turn the key to the “on” position where you will see all the lights come on the dashboard. Release the emergency brake and see if the light goes out. Repeat setting the brake and releasing the brake a few times.

What does the ABS warning light on a Mercedes mean?

If the ABS warning light is also illuminated this signals that the braking system has malfunctioned and your brakes may not work properly. In this case the Electronic Brake Force Distribution (EBD) warning light may also be illuminated. Can I still drive with my parking brake and brake fluid light on?

What does the SRS light mean on a Mercedes Benz?

What does SRS light mean? SRS stands for Supplemental Restraint System. If this warning light stays on in your Mercedes Benz, that means that there is a problem with the airbags or the components that are part of the SRS system.

When does the Mercedes Benz SOS malfunction warning come on?

If you don’t have access to the Star Diagnostic Tool you can have your Mercedes Benz dealer perform DTB P-B-82.95/636a, 03/24/2009 Supersedes: P-B-82.95/636 dated Oct. 29, 2008 “Instrument Cluster Message – “SOS TeleAid not Activated”” SRS Airbag Defective Warning could be triggered when the TELE AID malfunction is displayed.

What’s the cycle limit on Mercedes Benz SBC?

We belive that Mercedes Benz set a cycle limit to the SBC Hydraulic pump based on their testing and research. The SBC module counts breaking cycles, after exciting the value of approx 300000 , an error message occurs. Some of the errors reported are: REDUCED BRAKING POWER – VISIT WORKSHOP (Replace brake light switch first.)

What is the SBC error code for Mercedes CLS?

This error is common issue on Mercedes E Class W211, SL R230, CLS Class with SBC Error CODE C249F. After so many operation cycles the SBC looses efficiency or can completely fail while driving.

How to reset the lights on a Mercedes Benz?

To reset the lights, start up your Mercedes-Benz and turn the steering wheel all the way to the right, then all the way to the left. Do this a couple of times.

Where is the brake fluid in a Mercedes Benz?

Lift the hood on your Mercedes and locate the brake fluid container. The brake fluid container will be near the driver’s side rear firewall. The container will be labeled “brake fluid.”

Why does my brake light keep coming on?

Remove the cap on the brake fluid container and look at the level. Make sure that the brake fluid is full. If you have low brake fluid, the brake light will stay on. Look at all the electrical connections around the brake fluid container. Make sure that a wire has not fallen off or a connection unhooked.

Where is the brake light switch on a Mercedes Benz?

The brake light switch is located right above the brake pedal. To access it, remove the underside panel cover. Usually, the panel is held in place with 3 to 5 screws. Mercedes-Benz uses Torx head screws.

What are the symptoms of a defective brake light switch?

Common symptoms of a defective brake light switch. Car stuck in Park. ABS ESP ETS lights come on. Can not move the shifter from Park to Drive. Car won’t shift gears. Stuck in 2nd gear, limp mode. Brake lights don’t work. (Brake light switch can still be defective even if the brake lights work. Checking the brake light operation is not a good test.)

Lift the hood on your Mercedes and locate the brake fluid container. The brake fluid container will be near the driver’s side rear firewall. The container will be labeled “brake fluid.”

What is the part number for the brake light switch?

Here are some part numbers related to the brake light switch. 001 545 95 09 05, 001 545 9509, 0015459509 This part will fit models.

Where is the brake system warning light located?

Just about every car, truck or SUV has a series of warning lights located on the instrument cluster of the dashboard. Among them is a brake system warning light that lights up and tells you when something is wrong with your brake system.

What does it mean when your brake light is not working?

This is designed to verify that all of the warning lights are operating properly—if any do not illuminate at this point, it means that the bulb or other light source is inoperative and the warning light is not working properly.

Can a parking brake light be activated by ABS?

Usually, the brake fluid level sensor and the parking brake are the only two items that can activate the BRAKE light. But, not all vehicles are the same, and some of the earliest ABS systems would trigger both lights simultaneously for any ABS fault.

What does a brake warning light look like?

What Does a Brake Warning Light Look Like and What Does It Mean? Some common brake lights that can show up on a dashboard include: This light is a warning that brake pads are getting too worn and should be replaced soon: If these lights go off and on repeated or when you turn, it can mean to check the brake fluid level in the master cylinder:

Why is my anti lock brake light on?

The anti-lock brake system is a complex configuration of computers and sensors. When all of the components are working in perfect harmony, it ensures a quick, reactive system that can improve braking control under all surface conditions. Faults in this system are often first indicated by illuminated lights in the gauge cluster.

What does it mean when your abs light comes on?

Most commonly, this light is triggered by low brake fluid or an engaged parking brake. However on some vehicles, it can simply indicate a problem elsewhere in the system and can be illuminated immediately if there is an ABS fault.

Where is the brake light stop switch located?

Locate brake light stop switch The brake light switch is located right above the brake pedal. To access it, remove the underside panel cover. Usually, the panel is held in place with 3 to 5 screws.

Is there a problem with the brake light switch?

Too many to list here but the most frequently defective brake light switch problems are seen with E 320 C 240 CLK 500 ML 320 ML 350 S 430 to name a few. Starting back in 1996 model years all the way up to the current models. Can’t get car out of park, is it the brake light switch?

Where is the brake light switch on a Mercedes W210?

In the older W210 E-Class, it is located in the back on the back of the pedal. You may need to lay on your back to access the switch. To remove the switch, press on the locking tab and then rotate it clockwise. Step 4. Install new switch Once you remove the old brake light switch, unplug the electrical wires from it.

Locate brake light stop switch The brake light switch is located right above the brake pedal. To access it, remove the underside panel cover. Usually, the panel is held in place with 3 to 5 screws.

Where are the brake lights and emergency flashers located?

The brake lights and emergency flashers share the same lights in the rear so a short on the line should effect both areas. The brake light circuit passes through the flasher circuit so the trouble may be between those points but it could be after the flasher switch also.

Why are the brake lights not working but the tail lights are?

Blown out light bulbs are the most common reason for why the brake lights not working but the tail lights are. Remove the screws from the bulb lens (which you can access through the trunk or see your vehicle repair manual to get the exact location). Push the bulbs and turn them counterclockwise to remove from the socket.

Is it dangerous to drive with brake lights not working?

Driving at night with either brake lights or tail lights not working is dangerous for you and other drivers on the road. It takes a long time to notice when the brake lights not working but tail lights are or vice versa. It is so because you won’t know what is happening in the backside while driving until someone points it out.

How long does it take to replace a brake light bulb?

How long does it take to fix a brake light? 1 hour. This is the maximum time for brake light bulb replacement since it is not complicated at all. The process should be around 40 to 60 minutes to complete.

Are there brake light switch problems in Mercedes?

This is a common problem on Mercedes-Benz models E-Class, C-Class, S-Class, CLS-Class, ML-Class, CLK-Class and other. Too many to list here but the most frequently defective brake light switch problems are seen with E 320 C 240 CLK 500 ML 320 ML 350 S 430 to name a few.

Are there any Mercedes Benz models that have bas lights?

The BAS / ESP / ABS lights is not a problem with just Mercedes-Benz ML320 / ML430 models. It is a problem that has impacted all Mercedes-Benz models. We have included the top causes that trigger these lights to come on in the section below. This guide could save you hundreds of dollars.

Can a defective brake light switch cause an accident?

Learn how easy it is to change the brake light switch on your Mercedes Benz. Brake light switch issues with Mercedes-Benz cars are the #1 problem that most owners face. Defective brake light switch can cause the lights not to turn on, therefore causing accidents and possibly get you in a middle of a lawsuit you could have avoided.

Are there any issues with the Mercedes 190E?

If you are driving a 190E, you already know about the issues with failing rear door locks. You can replace the vacuum solenoid and get those doors opening again in no time by following this article. If you are driving a 190E, you already know about the issues with failing front door locks.

What does it mean when brake warning light comes on?

If it comes on with the brake warning light, it could indicate that the brake system is failing and you should stop straight away and call for recovery if you have breakdown cover. For roadside assistance, you can call the RAC on 0330 159 1111 even if you’re not a member.

What to do if your brake light switch is not working?

Try turning off the engine and remove the key, wait a few seconds and restart the car. That may solve the problem temporarily. Even though the problem could be multiple things, the brake stop light switch is the first thing you should inspect. Which Mercedes-Benz models are impacted by the defective brake light switch?

Why is my brake light not working on my Mercedes?

Yes it could be the brake light switch. It could be other problems such as low brake fluid level or failed ABS wheel speed sensor. There is no certain way to know without first doing some troubleshooting. Where is the brake light swtich located on a Mercedes-Benz? Right above the brake pedal.

Where are the Bas lights on a Mercedes Benz?

If your battery died or you recently replaced the battery, there is a good chance the ABS/ ESP / BAS lights are illuminating on your instrument cluster. To reset the lights, start up your Mercedes-Benz and turn the steering wheel all the way to the right, then all the way to the left.

How does the brake wear sensor work on a Mercedes Benz?

The brake wear sensors have two wires running to contacts embedded in plastic within them. The sensors are triggered when the pads (and thus the plastic of the wear sensors) wear down to the point where the two wires feeding into / out of them created a CLOSED circuit (or short) through the brake rotor.

Why do I need to replace my brake pads on my Mercedes C63?

This article applies to the Mercedes-Benz C-Class Non-AMG (2007-2014). See Related Discussions below for the AMG version of this how-to for the c63. The contact between the brake pads and rotors creates friction that slows the vehicle down. The larger the brake pad contact area, the more stopping power that is available to the driver.

How do you change the parking sensor on a Mercedes Benz?

Getting the new parking sensor to match the color of your car is easy. You will need to get a custom mixed spray can that matches the color of your Mercedes-Benz. You need the paint color code of your Mercedes-Benz. Mercedes paint code can be found on the sticker on the driver’s door. It is on the right side of the label.

How many sensors do I need for my CLK 500?

Getting conflicting info on how many brake pad wear sensors I need to do a brake job F and R on my ’04 CLK 500… One place says I need 1 F and 1 R, another says 2 F and 1 R, and the parts supplier says I need 2 F & 2 R Anyone got a clue…? Also, it seems there are 2 versions of sensors, 2 wire and 3 wire…

What happens when brake pads and sensors are replaced?

Once the pads and sensors are replaced the brake wear warning should disappear almost immediately. You might need to turn the ignition on and off a few times, but that’s it. Oh. 125K miles on what I think were the original pads and rotors, although I can’t be sure because the car had 85K miles on it when we bought it.

How to reset the Mercedes Benz ESP warning light?

Replacing the ABS sensor is easy, you can learn how to replace ABS sensor here. Note that once you will replace the ABS sensor and will still have the ESP warning light on. You will need to follow the procedures below to reset the light.

What are the different types of Mercedes Benz warning lights?

Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray), but there are over 40 of them so be patient! Models examined include AMG, B, C, CLA, CLS, E, G, GL, GLA, GLC, GLE, GLK, GLS, GT, M, S, SL, SLC and SLS Class and Series vehicles.

What should I do if my brake light switch is not working?

If the brake light switch doesn’t fix the problem, you should not replace any other parts without finding out the real reason for the light coming on. Get a hold of a diagnostic scanner and connect it to your car. In minutes, you will know the reason the ABS / ESP / BAS lights are on.

What should you do when your brake warning light comes on?

Vehicles with ABS brakes have two warning lights — one for ABS system malfunctions and one for mechanical problems. If one of the brake system warning lights come on, it can be a relatively minor problem or a major safety issue. Regardless of which brake light is illuminated, always check your car over before continuing to use your car.

Why does my left brake light keep coming on?

Mercedes 2013 C-250 – false dashboard warning light keeps coming on for left rear brake and tail light every day but my lights are ok! Bought the ML350 used and have changed 3 bulbs since February but the same “left brake light” message keeps coming up!

Why is there a brake warning light on my Chevy Silverado?

The brake warning light indicates that your Silverado has detected that one of its major brake components has failed, typically detected through a loss of pressure. You’ll feel a loss of pressure that manifests itself in the form of a “mushy” brake pedal.

When does the brake light switch show continuity?

Using the wiring diagram, we can determine which leads should have continuity and when. The brake-lamp portion of the switch will show continuity when the brake pedal is depressed. When we release the brake pedal, it returns to the up-position. In this position, the brake light switch changes to an open-circuit.

What causes a brake light to go out on one side?

Brake lights out on one side. A brake light out on one side only is most often a bulb or socket problem. Try the emergency-flashers and if the lamp still does not light, bulbs or sockets are the very likely cause.

How can I tell if my Mercedes Benz brake light is working?

Unfortunately, looking to see if the brake lights turns on while you press the brake pad, is not a good test to tell if the brake light switch is working properly. This is because the brake light switch has two or more micro-switches inside and only one of them controls the rear brake lights.

Why does my Mercedes Benz make a clicking noise?

It requires electrical power to crank the engine. The car makes a clicking noise but won’t start. Hint: Starter Problem or Low Battery This may seem obvious, but an old battery is the root of many headaches and can cause all sorts of malfunctions on Mercedes-Benz cars.

What happens when you fail a brake light switch?

A failed brake stop light switch may trigger the ABS, ESP, ETS warning lights on your dash, through your transmission into limp mode or now allow you to get the car out of park. Common symptoms of a defective brake light switch. Car stuck in Park. ABS ESP ETS lights come on. Can not move the shifter from Park to Drive. Car won’t shift gears.

How do you change the brake light switch on a Mercedes?

Once you remove the old brake light switch, unplug the electrical wires from it. Plug the wires in the new switch and install the new switch by twisting it counter-clockwise. Watch the following video on how to install brake stop light switch on an Mercedes-Benz E-Class . I replaced the brake light switch but the lights are still on.

Navigation