How to reset timing belt on Toyota Dyna?
Toyota Dyna /Landcrusier T-belt light reset – YouTube This is tutorial on how to reset timing belt on Toyota Dyna / Toyota Landcruiser (Same procedure for both).1. T-BELT MODE DISPLAYa) With ignition turned ON,
How to reset timing belt on Toyota Landcruiser?
This is tutorial on how to reset timing belt on Toyota Dyna / Toyota Landcruiser (Same procedure for both). 1. T-BELT MODE DISPLAY b) While pressing the trip switch, turn the ignition switch ON and hold it for 5 seconds. c) Release the trip switch, then press the switch again within 5 seconds. d) The digital display should change to T-belt mode.
How to reset the T Belt warning light?
T-BELT WARNING RESET COMPLETION a) After setting the replacement setting value, hold the trip switch ON for more than 5 seconds then release the switch. b) Check that the display has now changed back to ODO and that the warning light has gone off when the engine is started.
How do you change the distance on a T Belt?
While in the T-Belt mode, each press of the trip switch will change the displayed value by 10,000km increments. Once ” 20 ” (200,000km) is reached the display reverts back to ” 1 ” (10,000km) again. Remember, this setting is the number of kilometres to be travelled before the light comes on next, and once reset this counter will start from zero.
How to reset a Hilux D4D T Belt Light?
Press selector and hold for 5 seconds, don’t let go 4. Switch ign. on and hold for another 10 seonds 5. Release selector, number 15 will apear 6. Press selector 15 times 7. Press and hold selector untill odo re-apears 8. Start vehicle, T-belt light is off
When does the timing belt light come on?
No announcement yet. My timing belt light has come on at 200k kms as it should. I had the belt changed about 20k kms ago so just need to reset the light. I know I’ve got to move a bolt between 2 holes in the back of the instrument cluster, but no idea which bolt or which holes.