How to replace the drive belt on a Dyna Glide?
Remove the drive belt off of the front and rear sprockets. Discard the belt. Position your new belt onto the front and rear sprockets before re-attaching the shock absorber to the swing arm. Apply Threadlocker (blue) to the lower shock mount bolt before torquing to 30 to 40 ft/lbs. Figure 14. Shock disconnected and swung upwards for belt access.
How can I lower my drive belt on a Harley Davidson?
The other method is to take off the lower shock mounts, and lower the bike, via a jack, to bring the axel nut height above the muffler. This would be done on models that the exhaust is more involved to drop, where as 2-4 bolts can disconnect rear shocks.
When to replace a Softail belt on a Harley Davidson?
Watch part 1 of 3 of a Harley softail belt replacement provided by Fix My Hog. When it comes to Harley-Davidson maintenance the rear drive belt is a big one. There are many factors other that a belt breaking that might make you change it misalignment or warpage due to incorrect installation of parts.
How much does a Harley Davidson Dyna Low Rider cost?
Oh, and little dudes who think Sportsters are girls bikes. Alllll those guys buy this thing.” The Harley-Davidson Dyna Low Rider costs between $14,399 and $15,349 depending on color options, weighs 666 pounds wet, holds 4.7 gallons of fuel, and gets 40 or so miles per gallon.
Remove the drive belt off of the front and rear sprockets. Discard the belt. Position your new belt onto the front and rear sprockets before re-attaching the shock absorber to the swing arm. Apply Threadlocker (blue) to the lower shock mount bolt before torquing to 30 to 40 ft/lbs. Figure 14. Shock disconnected and swung upwards for belt access.
What kind of motorcycle is the Dyna Low Rider?
1993 Harley-Davidson 1340 Dyna Low Rider. Picture credit R. (DragonSlayer) Wells. Submit more pictures. More pictures… 3.4 Check out the detailed rating of reliability, maintenance costs, value for money, etc. Compare with any other motorcycle.
Do you need to replace the drive belt on a Harley Davidson?
The drive belt used on modern Harley motorcycles have a long service life without the need of any regular maintenance. That being said, at some point in a bike’s life the belt will need to be replaced.
How do you remove battery from Harley Davidson Dyna Glide?
Remove the screws and slide the battery cables through the tray as it is removed from the bike. With a catch pan handy, remove the primary drain bolt located at the rear of the primary cover and allow the oil to drain. Be sure to retrieve the sealing O-ring when removing the drain bolt. Figure 1. Battery and battery tray removal. Figure 2.
What kind of belt does a Harley Davidson use?
At first glance, the drive belt fitted to various Harley models may seem like an ordinary band of rubber. Despite this impression, loads of chemical and mechanical engineering went into the development of modern Harley drive belts to produce a truly astounding component.
When do you know you need to replace your drive belt?
Belt wear. Cracks and rot are, of course, indications that you should replace the drive belt. Any crack that’s more than halfway through the belt has to be replaced immediately. If your drive belt is damaged, don’t take chances. You could drive for miles without a problem, or you could end up stranded by the side of the road.
When to know if your serpentine drive belt is bad?
Check for cracks, chunks missing, abrasions, rib separation, uneven rib wear, and damaged ribs. If you notice any of these, it is time to replace your serpentine/drive belt. As soon as you notice a squealing noise, loss of power steering, the engine overheating, or the belt looks bad, call a mechanic immediately to diagnose the problem further.
How long does a Harley Davidson drive belt last?
Compared to a contemporary drive chain, belts are much lighter weight, require no lubrication, resist stretching, and cannot rust or corrode. Harley drive belts are robust and have been known to last upwards of 100,000 miles before replacement becomes necessary.
Where can I find 1998 Harley Davidson Dyna Wide Glide?
Join the 98 Harley-Davidson Dyna Wide Glide discussion group or the general Harley-Davidson discussion group. List related bikes for comparison of specs. Bikez has discussion forums for every bike.
How big should a rear drive belt be?
Fitment Guide for Rear Drive Belts | Belt Drives, LTD. *All other sizes in 1-1/8″ width are for custom applications. Fitment of tooth size is the same as all of the above. **All other sizes are for custom applications only.
When did they start using belts on Harley Davidson?
If you’re the proud owner of a modern belt-drive Harley-Davidson, then you’ll get even better performance by using our Harley drive belts and belt drive system. Harley-Davison began using final drive belts in the 1980s to improve the overall experience for their customers.
What kind of belt do I need for my V-twin?
Same goes for the decades of primary belt experience Belt Drives, Ltd. has under its “belt”. When it comes to rear drive pulleys and primary drive systems, BDL more than likely has a belt or a system to fit your American V-Twin motorcycle. *NOTE: 1″ and 1-1/8″ wide belts are designed for custom show only.
What kind of belt do I need for rear drive?
When it comes to rear-drive pulleys and primary drive systems, BDL more than likely has a belt or a system to fit your American V-Twin motorcycle. *NOTE: 1″ and 1-1/8″ wide belts are designed for custom show only.
If you’re the proud owner of a modern belt-drive Harley-Davidson, then you’ll get even better performance by using our Harley drive belts and belt drive system. Harley-Davison began using final drive belts in the 1980s to improve the overall experience for their customers.
When did they start using final drive belts?
Harley-Davison began using final drive belts in the 1980s to improve the overall experience for their customers. Riders tired of constantly oiling and cleaning their drive chains fell in love with the low-maintenance, low-noise belts.
Can you put an aftermarket drive belt on a V-Rod?
Riders tired of constantly oiling and cleaning their drive chains fell in love with the low-maintenance, low-noise belts. Adding a quality aftermarket drive belt to your Harley V-Rod, Touring or Sportster will help you get even more power on your next run.