How to remove transfer case from Jeep Cherokee?
Once everything is disconnected from the 249 transfer case, you can start removing the 249 transfer case mounting bolts. These are the bolts that mount the 249 transfer case to the transmission. Be sure you have a jack under the transfer case, as a 249 transfer case weight almost 100#. Have a drip pan ready.
How much does a Jeep Cherokee 249 transfer case weigh?
Be sure you have a jack under the transfer case, as a 249 transfer case weight almost 100#. Have a drip pan ready. As you remove the transfer case, you may leak a little transmission fluid out. Become a Patron of the JeepSolid garage!! Behind the scenes look at what goes on and a more personal interaction and discussion.
Can you take transmission off of Jeep Cherokee?
You will also want to think this through as Jacks are not allowed in the yard and if there are nuts or bolts on the bottom of the transmission that you will need to access, you might want to do that before it drops.
Can you remove transmission and transfer case at same time?
Pull Tip: If you need both the transmission and the transfer case you can leave them connected but it will be quite a bit heavier and more awkward to remove. See the Transmission video on how to remove both.
How to remove automatic transmission from Jeep Cherokee?
Push the transmission over to the passenger side until the transfer case linkage comes free which will cause the whole unit to drop even farther. Disconnect electrical connections, breather lines, sensors, and shift linkages from the top of the transmission.
How much does it cost to replace transfer case in Jeep Grand Cherokee?
The average cost for a Jeep Grand Cherokee transfer case shift motor replacement is between $835 and $844. Labor costs are estimated between $35 and $44 while parts are priced at $800. This range does not include taxes and fees, and does not factor in your specific model year or unique location. Related repairs may also be needed.
Push the transmission over to the passenger side until the transfer case linkage comes free which will cause the whole unit to drop even farther. Disconnect electrical connections, breather lines, sensors, and shift linkages from the top of the transmission.
Pull Tip: If you need both the transmission and the transfer case you can leave them connected but it will be quite a bit heavier and more awkward to remove. See the Transmission video on how to remove both.
How is a transfer case shift motor replaced?
Transfer case shift motor replacement involves removing the shift motor from the exterior of the transfer case housing, and moving the electrical connector from the old part to the new part. Then the new shift motor can be installed, ensuring the correct orientation.