How to remove the centre console from a sat nav?
Remove the clock/ switches surround, again by gently levering it out. Remove the cupholder (3 screws), heated seats switch (if fitted) and boot release/ ESP switches and also the one screw above this switch. Now remove the metal bracket that secures the centre console to the dash console.
Is there a new clock surround for sat nav?
New clock surround, the ones in sat nav equipped cars are about 5mm deeper, you can get away without this as described later. First thing to do is to remove the old stereo, get some of the correct removal keys (Halfords, Ebay etc) and remove it, the unit in my car was the Sony 6CD unit.
How to install a touchscreen sat nav facelift?
The unit also controls the radio, CD changer and climate control. First thing is to gather together all the necessary parts, everything is needed otherwise the installation cannot be totally completed so make sure you order all the bits from a breaker or strip them all out of the donor vehicle.
Where are the 4 lugs on the centre console?
In case of failure to unplug the connector with switch still in place, remove the switch and then unplug the connector. The switch has 4 lugs (2 per front and rear side), the edges of which rest against underside of the trim. It is nearly impossible to press all 4 lugs and simultaneously push the switch up with one hand through gear lever opening.
Remove the clock/ switches surround, again by gently levering it out. Remove the cupholder (3 screws), heated seats switch (if fitted) and boot release/ ESP switches and also the one screw above this switch. Now remove the metal bracket that secures the centre console to the dash console.
New clock surround, the ones in sat nav equipped cars are about 5mm deeper, you can get away without this as described later. First thing to do is to remove the old stereo, get some of the correct removal keys (Halfords, Ebay etc) and remove it, the unit in my car was the Sony 6CD unit.
The unit also controls the radio, CD changer and climate control. First thing is to gather together all the necessary parts, everything is needed otherwise the installation cannot be totally completed so make sure you order all the bits from a breaker or strip them all out of the donor vehicle.
Can You retrofit Denso touch screen navigation unit?
This guide is to retrofit the Denso touch screen navigation unit to a facelift MK3, it is possible to fit the unit to a non facelift car and there is a guide to doing this elsewhere in the workshop wiki’s. It is fairly straightforward with a small amount of wiring/ crimping to do and a lot of dashboard & interior dismantling and running of cables.