How to remove rear brake drum on Hyundai Getz Fixya?
1. After removing the wheel, remove the brake drum. 2. Remove the shoe hold down spring, the automatic adjuster spring and adjuster lever. 3. Spread the shoes and remove the shoe adjuster. 4. Remove the shoe to shoe spring and shoe hold down spring. You can’t post conmments that contain an email address.
Where do the cables go to adjust the handbrake?
All three can be adjusted. Some cars have a pair of handbrake cables separated by a relay lever located under the car. A primary cable runs from the handbrake lever to the relay lever; a secondary cable goes from the relay lever to the brakes.
How do you adjust the handbrake on a clevis?
Tighten the locknut and refit the clevis pin with a new split pin. After adjusting, hold the adjuster nut steady while tightening the locknut. On most cars with all-round disc brakes , the handbrake operates on the rear discs, but on a few cars it operates on the front discs.
How does a handbrake adjuster on a disc brake work?
There are many types of adjuster, but they all have the same effect that of shortening or lengthening the cable. The handbrake pads on some disc brakes are separate from the pads operated by the hydraulic system. A single adjustment compensates for wear on separate pads and for cable stretch.
Where can I find cheap Hyundai Getz handbrake parts?
Our Network will deliver New Handbrake Parts at discounted prices, or even very cheap Used Hyundai Getz Handbrake Parts direct to your door. We specialise on being the No1 online Car Spares Finder and Locator in the UK and are very confident in supplying you with used and refurbished Hyundai Getz Handbrake Spares at very cheap prices.
Where do you adjust the handbrake on a car?
A single adjustment compensates for wear on separate pads and for cable stretch. Some are inside the car, at the base of the handbrake lever. Most, however, are underneath the car – and are probably dirty and rusty. Whenever you work under the car, always put it on firm supports such as axle stands.
Tighten the locknut and refit the clevis pin with a new split pin. After adjusting, hold the adjuster nut steady while tightening the locknut. On most cars with all-round disc brakes , the handbrake operates on the rear discs, but on a few cars it operates on the front discs.
There are many types of adjuster, but they all have the same effect that of shortening or lengthening the cable. The handbrake pads on some disc brakes are separate from the pads operated by the hydraulic system. A single adjustment compensates for wear on separate pads and for cable stretch.