How to remove automatic transmission from Jeep Cherokee?

Push the transmission over to the passenger side until the transfer case linkage comes free which will cause the whole unit to drop even farther. Disconnect electrical connections, breather lines, sensors, and shift linkages from the top of the transmission.

Where is the OBD2 connector on a Jeep ZJ?

To diagnose your vehicle yourself, download our EOBD-Facile car diagnostic software. Use our search engine below to locate your OBD2 port! You will find below several pictures which will help you find your OBD connector in your car. Compass (2016 – …) Grand Cherokee WK2 (2011 – …)

How does Uconnect work on a Jeep Cherokee?

Your smartphone integrates seamlessly with your available Uconnect® system to let you make and receive calls, reply to text messages using your voice, play songs from your smartphone and more, right from your Jeep® Brand vehicle. Enjoy the features of your smartphone with the convenience of your Uconnect system.

How do you change anti lock brakes to non ABS?

Raise the hood of the car and disconnect the brake lines at the anti-lock brake control unit by using a flair-nut wrench. Note the routing of the lines from the master cylinder. Each of the lines will be rerouted to the appropriate wheel. Unbolt the control unit from the mounting bracket with a socket wrench, and set it aside for proper disposal.

Is there a vacuum leak in the Jeep Cherokee 4.0?

A common problem in the 4.0 jeep engines is vacuum leaks around the throttle body. Here’s the solution I found for the HUGE vacuum leak in my 2000 Cherokee. Category Autos & Vehicles Show moreShow less Loading… AutoplayWhen autoplay is enabled, a suggested video will automatically play next. Up next

What is the OBD code for a Jeep YJ?

would be FLASH … FLASH FLASH followed by a , followed by the next code. Code 55 signals the end of stored OBD codes. You can repeat the key sequence as many times as needed if you were unsure of a code. *= Check Engine light will not illuminate at all times if this Trouble Code it present.

Can you check the engine code on a Jeep Wrangler?

When Chrysler / Jeep came up with this idea for getting the engine codes, it was a very smart move. This generation of Wranglers and Cherokees had the most simple diagnostics of any other. You need no special scanner to get the trouble code.

What should the temp be in a Jeep Cherokee?

Make sure not to mix coolants as red and green coolant don’t mix well and can end up becoming a jelly like substance. The last step is to start your Jeep up and let it idle. The temperature gauge should climb to 160*, 180*, or 195* depending on what thermostat you just installed.

How long does it take to replace the thermostat on a Jeep Cherokee?

If the temperature continues to climb past that point you may have air in the cooling system or a part of your cooling system may need to be replaced or upgraded. Replacing the thermostat on your 4.0 Jeep should only take about an hour or less, and is a fairly easy job even for the novice mechanic.

What kind of engine does a Jeep Cherokee have?

The new HO engine replaced the older 177 hp version of the 4.0 L engine in all installations. The Cherokee was also made in right hand drive format, initially for the United States Postal Service.

Is there a two door version of the Jeep Cherokee?

Both two- and four-door versions of the XJ Cherokee were offered throughout its lifetime, each having exactly the same track and wheelbase measurements. Two-door models, however, received longer doors and front seats that could fold forward to assist in rear passenger entry and exit.

Where does the new Jeep Cherokee get its name?

Cherokee name revival in the U.S. The Jeep Liberty was sold outside of North America as the Jeep Cherokee (KK), allowing the new Cherokee to be easily marketed globally. Jeep also believes the Cherokee name will attract previous Jeep owners, because of the name’s heritage. The new Cherokee is built in Toledo, Ohio.

What’s the difference between the new Jeep and the old jeep?

“The new XJ Jeep was 1,200 pounds lighter, 31 inches shorter, six inches narrower and four inches lower than the Cherokee SJ it replaced, and yet — thanks to unibody construction — the XJ kept 90 percent of its predecessor’s interior volume.”

Why does my Jeep Grand Cherokee not shift gears?

For example, you may find that you’re only able to drive the car in the automatic transmission’s third gear, only being able to select the other two gears when you shift the transmission manually. The most common cause of transmission problems is the easiest to fix: check the fluid level in the transmission and restore it to the proper levels.

Is there a problem with my Jeep Grand Cherokee?

Very often, this will solve the problem. But Jeep Grand Cherokees seem especially prone to more serious transmission problems, and some owners are quite vexed at their inability to determine the causes.

Can a Jeep Grand Cherokee Drive in two gears?

You’re often still able to drive the vehicle, but it only operates in one or two gears. For example, you may find that you’re only able to drive the car in the automatic transmission’s third gear, only being able to select the other two gears when you shift the transmission manually.

Are there any transmissions left in my Jeep?

Nearly every year new transmissions or improved older designs hit the market, and there is no reason to expect that currently available transmissions will not be discontinued at some point. However, hopefully there will be plenty of used re-buildable transmissions to supply our Jeeps as they age.

Are there transmission problems with the Jeep Cherokee?

In 2016 there’s no doubt that there were fewer complaints related to the Jeep Cherokees transmission problems, but they were still one of the biggest issues with the model year, and they seem to be mostly ignored by Chrysler in terms of fixes that were available.

How do you remove a transmission from a jeep?

Remove the bolts holding the transmission to the transmission crossmember. Remove the bolts on each end of the transmission crossmember to drop the transmission. TIP- Be careful as the transmission will lean way back because it is only supported now by the engine mounts!

Where was the Jeep Cherokee automatic transmission control module taken?

The vehicle was taken to michiana Chrysler Dodge Jeep ram fiat (120 w mckinley Ave, mishawaka, in 46545) where a software update was completed. The failure recurred and the vehicle was taken back to the same dealer where the technician cleared the codes.

What kind of transmission does a Jeep Grand Cherokee have?

44RE: A four speed automatic transmission was used in 1996 to 1998 Jeep Grand Cherokee’s with 5.2L engines. 42RE: A four speed automatic transmission was used in 1993.3 to 1998 Jeep Grand Cherokees with 4.0L engines.

What kind of transmission does a Jeep Comanche use?

AW4: A four speed automatic transmission was used in 1987 to 2001 Jeep Cherokee (XJ), & Jeep Comanche with 2.5L & 4.0L engines. It was also used in 1987 through 1992 Jeep Comanche & 1993 through 1993.5 Jeep Grand Cherokee with 4.0L engines.

What’s the gear ratio on a Jeep Grand Cherokee?

44RE: A four speed automatic transmission was used in 1996 to 1998 Jeep Grand Cherokee’s with 5.2L engines. Gear Ratios: 1st Gear: 2.74:1, 2nd Gear: 1.54:1, 3rd Gear: 1.00:1, 4th Gear: .69:1, Reverse Gear: 2.20:1 42RE: A four speed automatic transmission was used in 1993.3 to 1998 Jeep Grand Cherokees with 4.0L engines.

What kind of transmission does a Jeep Cherokee have?

Complete with either a 3.0-liter V6 turbocharged diesel, 3.7-liter PowerTech V6 gasoline, 4.7-liter PowerTech V8 gasoline, or 5.7-liter Hemi gasoline engine. The transmission options are the 5-speed W5A580 automatic or the 5-speed 545RFE automatic type.

How much does it cost to repair a jeep transmission?

Typically, you can expect to pay between $1,800 and $3,400 for a transmission replacement, while the Jeep transmission repair cost for one part may be less than $1,000. The Jeep Cherokee is a specific line of SUVs produced by Jeep spanning five generations over 40 model years.

Why is my Jeep Grand Cherokee transmission not working?

Regarding the 2011 Jeep Grand Cherokee, the top categories of concern are the electrical system, the engine, interior accessories, fuel system, and transmission. Owners state that the transmission does not work properly, the transmission fluid leaks, and the car sticks while switching into a different gear.

How many generations of the Jeep Cherokee are there?

The Jeep Cherokee is a specific line of SUVs produced by Jeep spanning five generations over 40 model years. Produced by American Moors, Chrysler, DaimlerChrysler, Chrysler Group, and FCA, the Jeep is a long-standing staple in the car industry.

How to disconnect transmission cooler lines on the Jeep Cherokee?

How to Disconnect Transmission Cooler Lines on the Jeep Cherokee. 1 Step 1. Place a pan large enough to hold five gallons of coolant under the engine’s radiator. Open the petcock on the engine’s radiator with pliers 2 Step 2. 3 Step 3.

How do you remove transmission lines from Radiator?

Loosen the metal clamping nuts that secure the sending and return transmission cooler lines to the side of the radiator with an open-ended wrench. Pull the lines off of the radiator. Follow both lines until you locate the mounting point on the transmission housing.

How do you remove the transmission transfer case?

Pull the transfer case off the transmission. Start removing all the other lines and cables still connected to the transmission including the shift cable, the Tranny wiring harnesses, NSS harness, CPS harness, and zip ties. Remove the bell housing cover plate and the starter to gain access to the torque converter and flex plate. New To Pull-A-Part?

Where is the disconnect on a Remco transmission?

The Drive Shaft Disconnect was developed to provide a quick and easy means of disconnecting the transmission while sitting in the driver’s seat. The coupling (mechanical clutch) is installed into the rear portion of the vehicle’s drive shaft at the differential.

How do you disconnect the transmission from the drive shaft?

This requires physically disconnecting the driveshaft from the differential and tying it up to the frame or other attachment point. The Drive Shaft Disconnect was developed to provide a quick and easy means of disconnecting the transmission while sitting in the driver’s seat.

What kind of transmission does a jeep have?

Copy and paste it, adding a note of your own, into your blog, a Web page, forums, a blog comment, your Facebook account, or anywhere that someone would find this page valuable. © Copyright 2007-2020 4-the-love-of-jeeps.com All Rights Reserved Not affiliated in any way with Chrysler/Fiat, or the Jeep division past or present.

Navigation