How to remove a stubborn crank pulley bolt?
Stubborn Crank Pulley Bolt Removal Procedure – 2 Methods Pick Your Weapon! – YouTube If playback doesn’t begin shortly, try restarting your device.
How to loosen a crankshaft pulley harmonic balancer bolt?
How to loosen a difficult crankshaft pulley harmonic balancer bolt. The first method uses the power of the starter motor, and the second method uses the force of the rolling vehicle. Be sure to disconnect the main coil wire before attempting, because you DO NOT want the car to start when doing this!
How big is the crank bolt on a Honda?
You are dealing with a 19mm bolt, which is called the “Crank Bolt”. This holds the harmonic balancer to the crank shaft. It is threaded opposite of the rotation of the engine, so this bastard is tighter than….well. It will take a load of leverage to break it loose. Once broken for the first time, you will hear a very loud pop.
Stubborn Crank Pulley Bolt Removal Procedure – 2 Methods Pick Your Weapon! – YouTube If playback doesn’t begin shortly, try restarting your device.
What happens when you pull the pulley on a crankshaft?
The crankshaft pulley bolt is notorious for holding fast despite using powerful tools and long leverage bars to remove it. Furthermore, the pulley tends to spin and spin as you try to bear down on the bolt head. Once you have this bolt freed, you can move onto the rest of the removal, rebuild and installation process unhindered.
How to loosen a difficult crankshaft pulley harmonic balancer bolt. The first method uses the power of the starter motor, and the second method uses the force of the rolling vehicle. Be sure to disconnect the main coil wire before attempting, because you DO NOT want the car to start when doing this!
Which is the most torqued crankshaft pulley bolt?
Crankshaft pulley bolt is the most stubborn, highly torqued and perhaps the most challenging bolt to remove in a car. These bolts can have a rating of 400-700 lb-ft or more especially if they’re rusty or have never been removed.
What are the best tips for crankshaft pulley removal?
How To – Trick To Getting Your Engine Crank Pulley Off Try Tightening it. First try tightening the nut to see if you can break the mechanical weld that has formed in the threads. Heat. Special Tools. Your final way off. Final Note. The YouRepair Store sells a full line of Mechanics Tools including special tools used for removing crank pulley bolts and other tough items.
What causes a crank shaft pulley to wobble?
What causes the crank pulley to wobble. A bad harmonic damper on the pulley would result in it wobbling and only solution is to replace the pulley, which should be done asap as failure of the pulley can result in the drive belts getting entangled and if the belts were to get to thr timing belt, it can damage the engine.
What is the function of crank pulley?
A crankshaft pulley powers components on the crankshaft. Crankshafts are responsible for driving the car wheels. Crankshaft pulleys transmit mechanical power and torque, or the force of motion, through the pulley system to additional car elements, such as the power steering pump and alternator.
What is a crank pulley?
In many cases, the term crankshaft pulley is used to describe the pulley that comes with the vehicle, while crank pulley refers to a component that is installed as an aftermarket upgrade, though the terms are interchangeable. This pulley transfers energy to the air conditioning, stereo, and alternator, among other components.
Where do you put the tool to remove a pulley?
Place the tool behind all the fluid lines except the one you removed the 10mm bolt to. The tool goes in front of this line. You can move the larger fluid line closest to the pulley out of the way since you removed the bolt.
How do you break a crank pulley bolt?
Remove the MPI fuse, place breaker bar in pulley bolt, place the bar on top of the axle and crank the car over for a second, maybe 2 and the impact will loosen it up. This is how I do it since I never use any type of air tools on my car.
How to remove a crankshaft pulley no power or air tools needed?
How to remove a crankshaft pulley, no power or air tools needed. DIY car repair with Scotty Kilmer, an auto mechanic for the last 42 years. 1. Bluetooth Scan Tool: http://amzn.to/2nfvmaD 2. Cheap Scan Tool: https://amzn.to/2D8Tvae 3. Professional Socket Set: http://amzn.to/2Bzmccg 4. Wrench Set: http://amzn.to/2kmBaOU 5.
What’s the best way to remove a BMW crankshaft bolt?
Bentley recommends BMW special tool # 11 2 150. Very helpful. Since no one has this tool or is going to buy it from the dealer, another method of removing the bolt is necessary. Wrap your old timing belt around the teeth on the vibration damper and clamp it tightly with vise grips.
How do you tighten a crankshaft hub bolt?
Wrap your old timing belt around the teeth on the vibration damper and clamp it tightly with vise grips. Now rotate the crankshaft clockwise, using the crankshaft hub bolt, until the vise grips are wedge in under the water pump. Use you breaker bar (or a big torque wrench if you want) to tighten the bolt.
The crankshaft pulley bolt is notorious for holding fast despite using powerful tools and long leverage bars to remove it. Furthermore, the pulley tends to spin and spin as you try to bear down on the bolt head. Once you have this bolt freed, you can move onto the rest of the removal, rebuild and installation process unhindered.
How much oil does it take to tighten a crank pulley?
(2) Apply engine oil to the crank pulley bolt seat and thread. (3) Tighten the bolts temporarily with tightening torque of 44 N·m or 33 ft-lb ). (4) Tighten the crank pulley bolts. Tightening torque: 180 N·m or 132.8 ft-lb)
How to lock the crank pulley on a Subaru?
To lock the crankshaft, use Shop Tool 499977100 CRANK PULLEY WRENCH (1) Clean the crankshaft thread using compressed air. (2) Apply engine oil to the crank pulley bolt seat and thread. (3) Tighten the bolts temporarily with tightening torque of 44 N·m or 33 ft-lb ). (4) Tighten the crank pulley bolts.
Can a crank pulley bolt damage a flywheel?
Get a proper crank locking tool that fits in place of the starter, car in gear, someone standing on the brakes and a huge breaker bar+extension handle (scaffold bar). Thanks for the replies. Cars an e46 BMW. I’ve heard that locking at the flywheel can damage the flywheel, not sure if that’s true?
Is the crank pulley bolt a Chuck Norris bolt?
This is a crankshaft pulley bolt, the Chuck Norris of bolts. 450 deafening, neighbour waking, light dimming newton metres of torque later…Nothing. The bolt won. Does anyone have an inspiring ideas to get this thing off? I think attempt number 4 will be taking it to a garage with the biggest air gun I can find.
Can a pulley be removed from an engine?
Once you have removed the engine pulley bolt, the pulley should pull off the motor shaft. It will likely be stuck. I recommend spraying some rust penetration fluid at the top of the pulley and let it soak to help remove the pulley.
How to remove the engine pulley bolt on a craftsman lawn mower?
Craftsman Exclusives, Craftsman, Lawn Mowers, Lawn & Garden 1 Answer from this member: The engine pulley bolt is removed by turning it counterclockwise (CCW). It will likely require a 5/8″ socket and breaker bar to remove the engine pulley bolt.
Crankshaft pulley bolt is the most stubborn, highly torqued and perhaps the most challenging bolt to remove in a car. These bolts can have a rating of 400-700 lb-ft or more especially if they’re rusty or have never been removed.
How long does it take to soften a Harley bolt?
It should take at least 2 or 3 minutes of evenly applied heat to soften the Loctite. Without the use of this heat, the Loctite may break into pieces as the bolt is being removed. These broken fragments of Loctite can be very abrasive and can damage bolt and shaft threads.
Get a proper crank locking tool that fits in place of the starter, car in gear, someone standing on the brakes and a huge breaker bar+extension handle (scaffold bar). Thanks for the replies. Cars an e46 BMW. I’ve heard that locking at the flywheel can damage the flywheel, not sure if that’s true?
How to loosen a crankcase pulley on a Honda?
A simple way to hold the crankcase pulley so that you can loosen or tighten it. No expensive hard to find tools required, just a chain and breaker bar. A simple way to hold the crankcase pulley so that you can loosen or tighten it. No expensive hard to find tools required, just a chain and breaker bar. Skip navigation Sign in Search Loading…
How do you remove the crankshaft pulley on a Range Rover?
Amidst working on getting off the timing chain cover I am stuck on the crankshaft pulley. I have the RAVE cd and have found the pulley section. It says to have someone hold a striaght edge something or other (perhaps a screwdriver) in somewhere to keep the crankshaft from turning when removing the pulley.
Where is the pulley on a Land Rover?
Discussion in ‘ Discovery ‘ started by N8tabasco, Feb 26, 2007 . Amidst working on getting off the timing chain cover I am stuck on the crankshaft pulley. I have the RAVE cd and have found the pulley section.
Place the tool behind all the fluid lines except the one you removed the 10mm bolt to. The tool goes in front of this line. You can move the larger fluid line closest to the pulley out of the way since you removed the bolt.
How do you turn a crank pulley on a Tacoma truck?
Use the 22mm socket to turn the crank pulley so that the 2 holes are lined up vertically. With your pulley holder tool set up, get under the truck and pass the handle end towards the opening on the passenger fenderwell. Lay the handle on top of the frame.
A simple way to hold the crankcase pulley so that you can loosen or tighten it. No expensive hard to find tools required, just a chain and breaker bar. A simple way to hold the crankcase pulley so that you can loosen or tighten it. No expensive hard to find tools required, just a chain and breaker bar. Skip navigation Sign in Search Loading…
What kind of Puller does a 95 Camry need?
My 95 Camry needs the puller with the 3 arms on it where you put in two bolts and turn it… Any feedback would be helpful and appreciated! There is a way to do it. You put a wrench on the pulley bolt and block the other end against the floor or the frame.
Where is the Woodruff key on a pulley?
The pulley may have a woodruff key in a slot on the crankshaft, and a corresponding notch on the pulley, for proper positioning of the pulley to crank. Don’t lose the woodruff key. They’d be right hand threads-regular threads-to loosen, turn counter clockwise. An air impact wrench is best for removing the crank bolt.
How big is the pulley on a Toyota Camry?
Similar to the Toyota SST and the link provided by JDF99 above, I made a pulley/balancer immobiliser using 5mm x 25mm x 700mm flat steel bar and a galvanised steel floor flange. Of the various sized available, I used the 1.5 inch diameter for the 2003 camry V6 pulley/balancer; 1.25 inch floor flange will work also.
What kind of socket do you use for a crank pulley?
Using a 19 mm impact socket the crank pulley bolt came out like butter. Don’t use the Starter Bump Method to try and loosen the bolt. You run the risk of breaking your tools, Breaking something on the car, or stripping the bolt head. Use an Impact Socket 1/2 inch drive. You’ll probably break a standard socket. Use the 19mm for the Toyota Camry.