How to remove a radiator fan from a Dodge Grand?
Remove the left side headlamp bulb from the headlamp housing. Refer to Lighting and Horns. Remove the left headlamp module. Remove the cover over the relay. Disconnect the relay connector. Carefully drill out the two retaining rivets. Remove relay from vehicle. CAUTION: The relay mounting location is designed to dissipate heat.
Why does the radiator fan not come on when the AC is on?
In order for the AC Condensor to do its job it must stay as cool as it can. As for the engine coolant temp sensor, if the coolant is not hot enough to make the fan come on, then there is no need for the fan yet and there is no problem.
Where is the radiator fan relay on a Dodge Grand Caravan?
If the resistance is greater than 1 ohm , repair the wire harness as necessary. If the Radiator fan control module has failed you will need to replace it with a new one there is no way to repair it. The radiator fan relay is located below the left front headlamp module. The headlamp module must be removed to access the relay.
What to do if your Dodge Grand Caravan radiator does not turn on?
Test the resistance of the wire harness between the PCM connector terminal 26 and the sensor harness connector. Also check for continuity between PCM connector terminal 43 and the sensor harness connector. If the resistance is greater than 1 ohm , repair the wire harness as necessary.
What should I do if my radiator fan is not working?
A blown fuse is no big deal, and changing one does not cost a lot of money. If your car’s radiator fan is non-functional, check your car’s user manual and locate the fuse for the radiator fan controller or the fan. The fan itself often uses a big fuse of around 50A, while there might also be a separate small fuse to the fan control module.
Is there a way to test a radiator fan?
You can test the electrical radiator fans by taking a wire from the car battery, unplug the radiator fan connector, and put 12v+ and ground into the connector. This is the fastest and easiest way to test your radiator fans. Because the radiator fan is often drawing so much power, there is often a relay that is powering the coolant fan.
Why do you need a radiator fan in a car?
To stop the engine from overheating, we take the help of coolants that flow through a radiator into the engine. The radiator’s job is to keep the coolant cool so that when it returns back into the engine, it is able to absorb more heat. A radiator fan is thus used to keep the temperature of the coolant in check. Thus, it has an important job.
Where is the relay on a radiator fan?
The fan relay is often located in the engine bay’s fuse box, but the best way is to check your repair manual to find where it is located. Testing a 4 pin relay is often very straightforward. Remove the relay and give 12 volts to pin 30 and 85. Ground pin 86 and check if there is voltage coming out from pin 87.