How to release a tool in Haas control?
Tool Release: Press the Tool Release button Machine will blow air thru spindle to clear debris. Gently push the tool upward and then release the Tool Release button. Ensure tool is securely gripped by spindle before releasing it. 6. Repeat steps 2-5 until all tools are loaded.
What to do if the lock button is stuck?
If the door lock button is stuck out, keeping you from pressing it in, jiggling the handle and moving the door is likely to shake the jammed parts together. If you cannot get the lock button unstuck with simple jiggling and the door is locked, have no fear, you should still be able to get the door open.
Why is the release button on my shark rotator not working?
Turns out the wand had been inserted slightly twisted in the housing. So the plastic tabs that hold the metal wand in place at place at the top were off-center and turned. You could see a bit more space on one side of the round housing than the other side and that held the wand so tightly it would not budge.
What to do if a door handle does not retract?
Take the handles/knobs off of the door. Remove the handles, including the thru spindle. Use a tool (a flathead screwdriver will work) to twist within the gap the thru spindle inserts into. See if this retracts the handle. If the latch retracts, then the handles are not secured to the thru spindle properly.
How do you attach quick release Pins to a T handle?
The T-handle is easy to grip. Attach these pins to a machine cover or access panel, then clip them in to receptacles installed in the enclosure for quick access. Pins lock in place until you release them.
What makes a quick release pin lock in place?
For a more secure hold than standard quick-release pins, these pins lock in place until you push the button to release the spring-loaded retaining balls. For the tightest spaces, these narrow-grip pins have the smallest heads of any of our locking quick-release pins.
If the door lock button is stuck out, keeping you from pressing it in, jiggling the handle and moving the door is likely to shake the jammed parts together. If you cannot get the lock button unstuck with simple jiggling and the door is locked, have no fear, you should still be able to get the door open.
How do you push a pin to release a retaining ball?
Spin the handle up or down, then tighten the locknut to change the length by up to ½â€. Pins lock in place until you push the button to release the spring-loaded retaining balls. Also known as double-acting pins, these pins lock in place until you push the button or pull the ring to release the spring-loaded retaining balls.