How to read engine codes on 1990-1993 Volvo 240?
After 3 seconds, the LED should light. Press the button again for more than 5 seconds. the codes should now be erased. You can then repeat the procedure for reading codes and you should read ‘1-1-1’ for ‘no faults stored’. I hope this post is useful and keeps everybody on the road!
How to diagnose electrical problems in a Volvo?
[Editor] To assist in diagnosing and repairing electrical problems, consider acquiring: Volvo OEM Wiring Diagram Manual. This will be the best investment in manualsyou ever made. Silicone Dielectric Grease. This protects all connectors (save low voltage circuits such as the oxygen sensor) from corrosion.
Where is the Diagnostic Unit on a car?
It is mounted behind the left strut assembly and can be used to check for Diagnostic Trouble Codes (DTC), more commonly known as fault codes, in both fuel injection and ignition systems. This tool is a first step in diagnosing engine problems.
Are there any problems with the Volvo system?
Volvo has had problems with this system since it was introduced in 1976. Volvo’s still run into the same issues on their newer models. Possibly in theory Volvos system is better, but in reality it gets overlooked and inevitably becomes clogged up and causes oil leaks and idle problems.
How old is the latest version of the Volvo 240?
With the newest Volvo 240 now 25 years old, and the earliest incarnations heading into their 40s, examples are starting to show up on the collector car radar.
Where is the ECU on a Volvo 240?
ECU: the Engine Control Unit, which is a computer located on the right of the driver’s side footwell. this computer controls fuel delivery to the engine. EZK: a smaller ECU located on the passenger side firewall that controls spark timing for the engine.
Where is the EZK located on a Volvo 240?
ECU: the Engine Control Unit, which is a computer located on the right of the driver’s side footwell. this computer controls fuel delivery to the engine. EZK: a smaller ECU located on the passenger side firewall that controls spark timing for the engine. Right, so you’ve go the dreaded lambda light illuminated on your dash.
What does the lambda light on my Volvo mean?
What this light actually means is that one of the engine computers has detected a fault somewhere in the engine management system and is alerting you to its presence BEFORE any damage is done as a result. This post will explain how to use the self-diagnostic function to read codes and diagnose problems indicated by the lambda light.
Are there any problems with the Volvo 240?
It commonly fails in the open position allowing super heated air to be drawn into the engine, which reduces performance as well as dramatically shortening the life of the expensive air mass meter. The seats in the 240 are very comfortable when they are in good condition. 240 seats offer excellent adjustable lumbar back support.
Can a check engine light be read on a Volvo?
Codes that trigger the check engine light can be read with a generic OBD2 scanner . Codes stored in all other modules such as ABS, Airbag/SRS, Transmission, Central Electronic Module (CEM) require a Volvo scanner. We used iCarsoft for the Volvo scanner in this guide, but any Volvo scanner can be used.
Where are the diagnostic codes on a Volvo 940?
940 cars have two boxes: “A” and “B”; the former is used for engine diagnostics and ABS; the latter for SRS and cruise control. If fault codes related to the emission system are registered, the “Check Engine” lamp on the instrument panel is lit. The test cable is mounted to the side of A. There are three OBD diagnostic test modes (DTM): DTM 1.
How to read and clear Volvo error codes?
From the main menu, select the control module you want to diagnose—for example, Engine Control Module, SRS – Airbag Control Unit, or Anti-lock Brake System. Next, choose to Read Codes and write down all the DTCs. Write down all the codes that have a PRESENT or CURRENT status.
Is the 1990 Volvo 240 DL a good car?
1990 Volvo 240 DL, still one of the best cars! The 1990 Volvo 240 DL is one of the best cars out there! Many people don’t realize the amazing type of car the 240 is… It is not indestructible but with regular maintenance, like the one you should do to any other vehicle, it will last for many years.
When did the Volvo 200 series come out?
This book is about the Volvo 200 Series that is the Volvo 240, 242, 244, 245, 260, 262, 264 and 265 of the model years 1975 (75) up to and including 1993 (93) for the Dutch and Swedish sales markets. When I consider it necessary, I will also mention versions of the 200 Series destined for other sales markets.
When did the Volvo 245 change its name?
The last two model years the Dutch importer, Volvo Nederland Personenauto, changed the name for the 245 from stationcar in estate. Because the importer used stationcar for the greater part of the model years, I write this word in the Dutch version of the book instead of estate.
How often should I replace my Volvo 240?
Call for details. The 240 goes through engine and transmissions mounts on a regular basis! To prevent serious damage you’ll need to inspect them annually. Be prepared to replace them every 2-3 years depending on how hard you drive the car. The reason for the unusually short lifespan of these parts is due to the safety related design.
How to reset the service light on the Volvo 850?
How to reset the service light on the Volvo 850, 1993, 1994 and 1995 year models. – Auto Care Series – YouTube If playback doesn’t begin shortly, try restarting your device.
What kind of tank does a Volvo 240 have?
Volvo 240, a bulletproof tank. I had an 84 244DL, when I sold it to the neice of a friend it was running strong with original 350,000 miles. I replaced the alternator twice and the starter once.
When did the Volvo 240 go out of production?
Even though the Volvo 240 has been out of production since 1993, it is still a popular car among Volvo enthusiasts and a favorite among our staff. Over the past 40 years since it was introduced, we have come to know quite a bit about the iconic model.
What do I need to know about my Volvo 240?
In this group you can find info about the service interval, checklists and which oil and other lubrication is needed for your Volvo 240 or 260. It’s a pretty general section, but very useful for servicing your Volvo 240 or 260 with the right maintenance schedule.
What kind of manual does a Volvo have?
This group contains the Volvo 240 & 260 service & repair manuals for the engines (redblocks, PRV and diesel-engines), carburated and fuel injection systems and other engine components like the cooling system.
Why are the fuses on my Volvo 240 not working?
Second, the small contact area of the European ceramic style fuses also leads to corrosion due to electrolosis. Prevent numerous problems associated with the fuse box, by pulling all fuses and cleaning them annually.
How many horsepower does a 1987 Volvo 240 have?
How many horsepower (hp) does a 1987 Volvo 240 Sedan (244) 2.3 have? The 1987 Volvo 240 Sedan (244) 2.3 has 116 PS / 114 bhp / 85 kW. How much does a Volvo 240 Sedan (244) 2.3 weighs?
When did the Volvo 240 2.3 come out?
For stopping power, the 240 Sedan (244) 2.3 braking system includes Vented Discs at the front and Discs at the rear. The 240 Sedan (244) model is a car manufactured by Volvo, sold new from year 1987 to 1990, and available after that as a used car. Towing Capacity Max. : Independent. McPherson. coil springs. anti-roll bar De Dion axle.
What to do when your Volvo check engine light comes on?
Our service technicians have the most up-to-date diagnostic equipment that can quickly read Volvo OBD-II Trouble Codes. When your vehicle has a problem and your check engine light comes on, the On-Board Diagnostics (OBD) system in your vehicle will also trigger a code that can be used to diagnose what might be wrong.