How to install an illuminated star on a Mercedes Benz?
Turn your Mercedes-Benz on to make sure that not only is the assembly working, but that the light which you tapped into is working as well. Make sure to check the front of the car on occasion over the next week or so to make sure it hasn’t rotated loose during driving, and that the wires are still secure. Figure 5. Success!
How do you install a star on a car?
Route the connecting wire over the radiator, and connect it to the illuminated star. Install the star to the grill. Reconnect the battery, and start the car to test the new star emblem. When completed with the installation, re-install the removed front end components. Fuse box cover: It should snap back into place.
How do you remove the star from a Mercedes C-class?
Rotate the star clockwise to remove it. Open the hood, and locate the fuse box. Use a Torx screwdriver to remove the two screws from the fuse box cover, and remove it altogether. There are three tabs securing the fuse/relay module to the fuse box. With a flat head screwdriver, carefully pry out the module from either side. Figure 2.
How much does it cost to install an illuminating star?
If you need it installed, then the costs, according to our calls to a local dealership, will be close to $600 to $1,100 for the labor and the illuminating star. This will all depend on your local dealership as they will all vary in pricing.
How does the Mercedes Benz illuminated star work?
The illuminated star, considered as a brilliant accessory for your Mercedes-Benz, offers a unique, personal touch. Using LED and light-conductor technology, the star will illuminate in the front grille, creating a subtle, yet eye-catching look. What does the Mercedes Benz illuminated star cost?
Can a Mercedes Benz front lit Star be installed?
The front-lit star, as of today, is only compatible with the C-, E-, GL-, GLK-, M- and CLS- class. Mercedes dealerships state the entire install can take up to two hours to install. The star doesn’t illuminate every time the car runs. It will only light up when the car unlocks or when a door is opened.
Route the connecting wire over the radiator, and connect it to the illuminated star. Install the star to the grill. Reconnect the battery, and start the car to test the new star emblem. When completed with the installation, re-install the removed front end components. Fuse box cover: It should snap back into place.
How do you put a parking light on a Mercedes?
Once the battery has been disconnected, unplug the light to which you want to tap into. Splice the wires apart, apply the base’s wires, ground the star, and reconnect wires with a cap as well as electrical tape. If you would like to splice the parking lights, it is a gray wire. Once completed, reconnect the car’s battery. Figure 3.
Why are the lights not working on my Mercedes?
Lights not working – We have seen many Mercedes-Benz where one or a few lights don’t work. It can be that the left or right low beams, fog lights or turn signals may not work. You should always avoid splicing wires to get power for aftermarket HID lights, alarm or connecting a trailer hitch.
What does the Check Engine light on a Mercedes mean?
Mercedes-Benz owners may notice the check engine light plus P0170 and P0173 codes. In theory, these two codes mean that the fuel mixture is too rich or too lean. Most of the time these Mercedes-Benz fault codes are caused by a defective .
Is there an illuminated star on the Mercedes Benz W205?
The illuminated star emblem is not a standard feature for the Mercedes-Benz C-Class. So if you opted out of this option when building your w205, you will always have a choice to install an OEM illuminated star whenever you please. This emblem lights up whenever the car is started.
How do you put an illuminated star on a Mercedes C-class?
Remove the plastic panel over the radiator by popping out a series of plastic rivets. Route the ground wire of the electrical harness to the ground terminal located on the front right corner of the engine bay. Then, connect it to the terminal. Route the connecting wire over the radiator, and connect it to the illuminated star.
How to wire a led star on a Mercedes?
Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. They call me Flexx. I showcase mod videos on Mercedes and Audi cars. Hopefully these videos will inspire you to do the same for your car. Enjoy!