How to install a cylinder head on a Hyundai Accent?
Place the cylinder head carefully not to damage the gasket. 3. Install the cylinder head bolts with washers. Tighten the 10 cylinder head bolts, in several passes, in the sequence shown. Always use new cylinder head bolts. 4. Install the oil control valve (OCV) (A).
What are the torque specs on a Hyundai Fixya?
I checked the chilton manual for these specs and it said that 10 ft. lbs or 14 NM was the spec but after I started to try to torque the bolts at this spec it just seemed that I was going to strip out the threads before I reached the specified torque setting. Is this information correct or not?
How much torque does a Fixya head cap have?
The connecting rods torque to 29 foot pounds. The torque sequence for the head bolts and the correct way to tighten the bolts are attached to this reply. Thak You for using FixYa.
What is the torque of the head bolts?
You can’t post conmments that contain an email address. Hello vienotkelly: The correct Main bolt torque is 42 foot pounds. The connecting rods torque to 29 foot pounds. The torque sequence for the head bolts and the correct way to tighten the bolts are attached to this reply.
How big is the cylinder head on a Hyundai Accent?
Width : 2.0 ~ 3.0mm (0.0787~0.1181in.) Position : 1.0 ~ 1.5mm (0.0394~0.0591in.) After installing the cylinder head gasket on the cylinder block, apply sealant on the upper surface of the cylinder head gasket and reassemble in five minutes.
How to repair Hyundai cars 2006-2008 torque specifications?
These diagrams include: Access our Hyundai Carss 2006-2008 Torque Specifications Repair Guide Main Bearing Torque Sequence by creating an account or signing into your AutoZone Rewards account. Once you sign in, follow these instructions to access our Repair Guides. Add your vehicle in Manage My Vehicles. Enter your vehicle details.
What kind of torque does a Hyundai Sonata have?
BALL JOINT BOLT 43-52 (58-71) BALL JOINT ARM BOLTS EXCEL & SCOUPE (1991-94) 43-52 (58-71) BEARING CENTER BRACKET (SONATA) 26-33 (34-45) BRAKE CALIPER-TO-KNUCKLE (SONATA) 58-72 (78-98) STRUT BAR BOLT 75 (102) TIE ROD NUT ELANTRA, EXCEL, & SCOUPE 11-25 (20-34) SONATA 17-25 (23-34) WHEEL LUG NUT ALUMINUM WHEELS
How to install a fuel pump in a Hyundai Accent?
Connect the fuel hose (A), the PCV (Positive crankcase ventilation) hose (B) and the PCSV (Purge control solenoid valve) hose (C). 21. Connect the brake booster vacuum hose (A) and heater hoses (B). Install the heater hoses as shown illustrations. 22.