How to get a diagnostic code for a Harley Davidson?
The following procedure will instruct in retrieving and clearing ECM Diagnostic Trouble Codes and TSM/TSSM codes through the Harley guage cluster as well as a list of codes. 1- Turn Ignition switchto OFF & Run/Stop switch is to Run.
How to get the ECM code on a Harley Davidson?
The following procedure will instruct in retrieving and clearing ECM Diagnostic Trouble Codes and TSM/TSSM codes through the Harley guage cluster as well as a list of codes. 1- Turn Ignition switchto OFF & Run/Stop switch is to Run. 2- Push odometer resetbutton in & hold. 3- Turnignition switchto Ignition and release the odometer reset button.
How to get a DTC on a Harley Davidson?
6 – To get the DTC within an area of diagnostics, push and hold the odometer reset button in for 5 seconds and release. If there are any DTC’s the code will be displayed or the word “none” will appear if there are no DTC’s. Push the odometer reset button again to view additional codes if they exist. 7 – Record the codes.
Where to find psspt code on Harley Davidson?
“PSSPt” will display on the speedometer. Each letter signifies an area of the diagnostics testing, with the current selection flashing. Push the odometer reset button to scroll through the components for testing. Press and hold the odometer reset button for 5 seconds, then release. Any codes stored will be displayed on the speedometer.
The following procedure will instruct in retrieving and clearing ECM Diagnostic Trouble Codes and TSM/TSSM codes through the Harley guage cluster as well as a list of codes. 1- Turn Ignition switchto OFF & Run/Stop switch is to Run.
The following procedure will instruct in retrieving and clearing ECM Diagnostic Trouble Codes and TSM/TSSM codes through the Harley guage cluster as well as a list of codes. 1- Turn Ignition switchto OFF & Run/Stop switch is to Run. 2- Push odometer resetbutton in & hold. 3- Turnignition switchto Ignition and release the odometer reset button.
Where to find diagnostics menu on Harley Davidson Dyna Glide?
The diagnostics menu is all accessed and read from the digital odometer. Accessing the menu requires inputting a special code using the following buttons and switches. Turn the key ignition to OFF, and Run/Stop switch is to Run. Press and hold the odometer reset button.
What does the Code 02 mean on a Harley Davidson?
If it were a current code, the light would remain lit while running. Above codes can also be set if 02 sensor fails. CKP – Crank Position Sensor. The CKP generates an “AC signal” which is sent to the ECM where it is used to reference engine position (TDC) and speed.
Why is the radio not working on my Street Glide?
I replaced the battery on my wife’s 2010 Street Glide. Now the radio won’t come on. Any suggestions would be appreciated. A: If you have no power to your radio, check for a blown fuse 1st.
Can you reset the cel code on a Harley Davidson?
You may think you need an expensive code scanner or computer to check and reset CEL codes on your Harley, but the Motor Company designed a diagnostic mode into the computer. All you need are your ignition keys and a finger, and a pen to write down the stored codes before resetting.
Where can I find diagnostic trouble codes on my car?
The VID can be used to display all diagnostic trouble codes (DTC) on the vehicle. Suspect parameter number (SPN), failure mode indicator (FMI) and occurrence count numbers are listed. Source addresses and DTC descriptions are presented in plain text.
What is the fault code for bulkhead module?
The J1939 SA identifying all Bulk- head Module faults is 33. •Suspect Parameter Number (SPN) – Indicates what function on the ECU has failed. All J1939 SPNs for the BHM are listed in Table 2. •Failure Mode Indicator (FMI) – Indicates in what way the function failed. Also included is a reference table of all FMIs for both data bus protocols.