How to fold down the rear seat in a Hyundai Sonata?

Doing this could allow cargo to slide forward and cause injury or damage during sudden stops. To fold down the rear seatback: 1. Insert the rear seat belt buckle in the pocket (if equipped) between the rear seatback and cushion. 2. Make sure the rear seat belt webbing is in the guide to prevent the seat belt from being damaged. 3.

How to remove the back bench of Hyundai?

Reach between the seat cushion and back rest and pull the seat cushion up to a vertical position. Then pull the seat cushion out the drivers side rear door to remove it from its mounting bracket. Once the seat cushion is removed unbolt the folding back rest.

How do you remove the rear seat in a Kia?

If there are no bolts, you will lift the seat to remove it. If you can find no bolts, then try the following to remove the rear seat. Lift the front part of the seat to unlatch it. Move the seat cushion back towards the trunk, then lift. Install the seat in reverse order.

Is it safe to sit in the back of a Hyundai Sonata?

For this reason, the use of a cushion that holds the body away from the seatback is not recommended. Do not operate the vehicle with the headrests removed as severe injury to an occupant may occur in the event of an accident. Headrests may provide protection against severe neck injuries when properly adjusted. To raise the headrest, pull it up (1).

How do you remove the bottom of a car seat?

If the seat bottom is not bolted push on the lower portion of the seat in between where a persons legs would be and lift up on the seat at the same time, there should be clips on both sides of the seat. Once the seat bottom is out the seat back will be bolted on its lower edges, simply remove the bolts and the seat back should lift up and out.

Navigation