How to create new Caterpillar injector trim filesauto?
Here you can find the InjectorSeriaNo is same as the one in trim file Content between … will renew,now copy it and paste it into trim file And change the InjectorSerialNo you input in the Cat trim file calculator After then save this file and change the file format as .trm
Where to find injector trim on Cat et?
“Injector Trim” is displayed below a 268-2 or 630-2 Programmed Parameter Fault : Erratic, Intermittent, or Incorrect. The diagnostic code is displayed on Cat ET.
How many injector codes do you need for a C-15?
Just in-framed a C-15 at work (my first cat rebuild). Has anyone ever ran into having brand new re-man injectors right from CAT not having the 12 digit code needed for the trim files.
Where do I find the serial number for injector trim?
Record the injector serial number and the injector confirmation code for each injector. Click on Service Software Files in SIS Web. Then select “Injector Trim Files”. Enter the serial number for the injector in the search field. Download the injector trim file to the PC. Repeat this procedure for each injector, as required.
How do I install injector trim on my PC?
Click on “Service Software Files” in SIS Web. Then select “Injector Trim Files”.b. Enter the serial number for the injector in the search field.c. Download the injector trim file to the PC. Repeat this procedure for each injector, as required.
Where do I enter the injector trim code?
Go to the “Service” tab in ET, select “calibrations” and then “injector trim”. Double-click on each trim code one by one & enter the new trim number. When you replace an injector with NO trim code visible, you can use 1100 which is the Cat default trim code.
Is there a 4 digit number on the injector?
There is a 4 digit number on each injector. Can i use that number to replaced the 6999? Yes…use the 4-digit number from each injector. Go to the “Service” tab in ET, select “calibrations” and then “injector trim”. Double-click on each trim code one by one & enter the new trim number.
Do you know the trim code for ACERT?
Cat will swear the trim codes are for idle quality. Personally I’ve never had them make a difference in idle, but certain codes will give a little more power on non-Acert applications. Not sure for Acert though.
How does et load injector trim into ECM?
The Caterpillar Electronic Technician (ET) is used to load injector trim files into the Engine Control Module (ECM). Injector trim files are available from these sources: A CD-ROM that is packaged with each new injector and each remanufactured injector
What happens to the injector trim file if copy fails?
If the “Copy Configuration” fails, load all of the injector trim files manually into the new ECM. “Injector Trim” is displayed below a 268-2 or 630-2 Programmed Parameter Fault : Erratic, Intermittent, or Incorrect.
What’s the trim code for a cat injector?
Double-click on each trim code one by one & enter the new trim number. When you replace an injector with NO trim code visible, you can use 1100 which is the Cat default trim code. Anything is better than running 5232 or 6999 in all 6 holes (04-15-2014, 06:02 PM)Scrapper Wrote: I have one for trim codes, not files. The old 4 digit codes.
What’s the default trim code for a cat?
Go to the “Service” tab in ET, select “calibrations” and then “injector trim”. Double-click on each trim code one by one & enter the new trim number. When you replace an injector with NO trim code visible, you can use 1100 which is the Cat default trim code. Anything is better than running 5232 or 6999 in all 6 holes
How to install the injector trim file in Sis?
Click on “Service Software Files” in SIS Web. Then select “Injector Trim Files”.b. Enter the serial number for the injector in the search field.c. Download the injector trim file to the PC. Repeat this procedure for each injector, as required. d. 1. Establish communication between Cat ET and the engine ECM. Refer to Troubleshooting,2.
Where do I find the injector trim code?
“Injector Code” is displayed beneath the 630-2 code. Exchanging Injectors Exchanging injectors can help determine if a combustion problem is in the injector or in the cylinder. If two injectors that are currently installed in the engine are exchanged between cylinders, the injector trim files can also be exchanged.
What does the 630-2 code on the ECM mean?
A 630-2 (J1939) Calibration Memory : Erratic, Intermittent, or Incorrect code is activated if the ECM does not have an injector trim file for every cylinder. “Injector Code” is displayed beneath the 630-2 code. Exchanging Injectors Exchanging injectors can help determine if a combustion problem is in the injector or in the cylinder.
How to change the trim code on an injector?
Yes…use the 4-digit number from each injector. Go to the “Service” tab in ET, select “calibrations” and then “injector trim”. Double-click on each trim code one by one & enter the new trim number. When you replace an injector with NO trim code visible, you can use 1100 which is the Cat default trim code.