How to check no Cluster Bus message OBDII?
Using ohmmeter, check resistance between terminal No. 9 (White/Black wire) on connector C1 for instrument cluster and terminal No. 28 (White/Black wire) on PCM connector C3. If resistance is less than 5 ohms, replace instrument cluster. Perform TEST VER-2A .
What does no bus mean on an odometer?
What does no BUS mean on an odometer? Fleet and maintenance ma… It cranks but will not start. How /where do I check those. Vocational, Technical or Tra… My 2001 Town and Country has stopped starting when it gets freezing outside. I noticed a code come up on the odometer- p 0442. What does this … read more
Is there no bus, no gauges possible solution?
I’d like to offer my solution to the frustrating “no bus and no gauges” problem that I see is pretty common. I have a 2000 ram 1500 2X with the 5.9 automatic, however I believe that this is applies to all gen2 trucks regardless of drivetrain or engine type.
What kind of truck has no bus gauges?
I have a 2000 ram 1500 2X with the 5.9 automatic, however I believe that this is applies to all gen2 trucks regardless of drivetrain or engine type. My Story… See the end to get straight to my find. I’ve had my gauges go out with the “no bus’ message in the odometer window three times now!
What causes the No Bus message on the odometer?
Symptom: Engine will not start. Gauges are inoperative. “No BUS” message displayed on odometer. Problem 1 of 2: The 5v power supply from the Powertrain Control Module (PCM) is shorted due to a shorted Crankshaft Position (CKP) Sensor.
I’d like to offer my solution to the frustrating “no bus and no gauges” problem that I see is pretty common. I have a 2000 ram 1500 2X with the 5.9 automatic, however I believe that this is applies to all gen2 trucks regardless of drivetrain or engine type.
I have a 2000 ram 1500 2X with the 5.9 automatic, however I believe that this is applies to all gen2 trucks regardless of drivetrain or engine type. My Story… See the end to get straight to my find. I’ve had my gauges go out with the “no bus’ message in the odometer window three times now!
Why does my Dodge Ram have no bus?
These 5v sensors can short out the CCD bus because they share the same power source. You will have to cycle the key off and on to reset the PCM and CCD bus once you find the problem. “I’ve usually found that the no-buss on the pickups generally comes from the ABS unit.