How to check fuel pump signal in gmflash?
1. CONNECT PIN1 (BLACK GROUND) TO PIN16 (PINK GROUND) 2. CONNECT PIN32 (RD/WH BATT + ) TO PIN47 (GY FUEL PUMP 12+) THIS WILL POWER THE PUMP TO RUN AND CHECK FOR A FAULTY FUEL PUMP. 3. NEXT, CHECK FOR FUEL PUMP SIGNAL AT THE FUEL SYSTEM CONTROL MODULE. 4. FIND THE DARK GREEN/WHITE WIRE IN PIN13.
How to diagnose a faulty fuel system control module?
AT THE BOTTOM OF THIS PAGE, YOU WILL FIND THE YOUTUBE VIDEO FOR THIS PROCEDURE. YOU WILL ALSO FIND THE PIN OUT DIAGRAM FOR THE FUEL SYSTEM CONTROL MODULE FOUND ON 2007 AND NEWER GM VEHICLES. PLEASE REFERENCE THE DIAGRAM TO HELP PROPERLY DIAGNOSE A FAULTY FUEL SYSTEM CONTROL MODULE. 1. CONNECT PIN1 (BLACK GROUND) TO PIN16 (PINK GROUND) 2.
How to diagnose fuel delivery problems in a Miata?
A multimeter — you’ll need this to be able to measure resistance and DC voltage. Check the fuses with the meter. You want continuity. Check (listen) for the main relay clicking in when you turn on the switch. It’s on the passenger side fenderwell and it’s pretty loud. you should hear it in the cockpit of the car. Then, move on to: 1.
How can I reset the fuel cut off?
This is similar to an electrical circuit breaker in your home which can be easily reset by pushing the button or pulling the leverage down. All modern fuel injection cars are equipped with an inertial fuel cut off switch that shuts off the power supply for the fuel pump if the vehicle is in a collision.
Why does my GMC Sierra suddenly stop running?
Truck suddenly stops running, acting like it’s out of fuel. There is fuel in the gas tank and, I can hear the fuel pump when I turn the ignition on. Is there a fuse, or relay that is maybe causing this to happen?
How is fuel delivery controlled in a GMC Truck?
The powertrain control module (PCM) estimates air flow using inputs from the MAP sensor, throttle position sensor, temperature sensor and engine speed. Fuel delivery is controlled by pulse width modulation. The PCM varies the on-time or dwell of the MAXI injector to control the air/fuel mixture.
How can I tell if my GMC Truck has a hard start?
The first step in diagnosing a hard start or no start on a GMC or Chevy truck with one of these systems, therefore, would be to check fuel pressure. If fuel pressure is less than the KOEO specification, you need to test the fuel pump and its voltage supply circuit.
What to do if your fuel pump relay is failing?
If your vehicle is displaying any of the symptoms above, or you suspect that your fuel pump relay is having an an issue, have the vehicle inspected by a professional technician, such as one from YourMechanic, to determine if the component should be replaced.