How much primary oil does a Sportster take?
Using a funnel, pour 32 ounces (one bottle) of Harley Davidson Transmission and Primary Chaincase Lubricant into the primary chain inspection hole. According to the Sportster maintenance book, the fluid level should not go above the bottom of the clutch diaphragm spring.
How much oil does a primary?
I am aware that it takes three quarts of oil. The primary is only supposed to be filled up to the BOTTOM of the clutch spring. Start with one QT and add little by little until the level reaches the bottom of the shiny ring at the bottom of the clutch pack housing.
Which is oil to use in the 1200L Sportster?
:loco:locoI have a 2009 sportster 1200 L what oil can I use in it without having to buy oil from the Harley dealer? I have heard I can use Mobil One 20-50 with out any problem..I appreciate your reply’s….Mugs
Where to drain primary oil in 1988 Harley Davidson Sportster?
Unscrew the primary chaincase drain bolt, located along the bottom edge of the cover and directly below the clutch inspection port, using a T-40 Torx screwdriver. Drain the primary fluid into an oil drain pan.
What kind of engine did a 1988 Harley Davidson Sportster have?
Harley-Davidson’s 1988 Sportster-series motorcycle were powered by a then-new Evolution engine. Unlike the Twin-Cam engines used by the newer Softail and Touring models, which used separate transmission and primary chain-drive components, the Sportster housed both components in the primary chain case.
How much fluid can you put in a Sportster?
Yours is obviously a different year and may have a different spec. Prior to me actually reading the manual properly I used to put 32 ounces in because that’s what the manual said was the capacity.
What kind of oil to use in a Sportster primary?
Does anyone actually know the best type of oil/fluid to use in the Sportster Primary/Trans to help stop the hard knock/thud into first, and when downshifting? Even if it’s an Amsoil or Mobile-1 or other product? Is the Redline Lightweight alright in my bike? Any and all help is greatly appreciated!
How much primary oil do you need for a Harley Davidson Softail?
Set the torque wrench to 14-21 foot-pounds of torque and tighten the plug. It helps to use a funnel designed for a primary case. Harley Davidson Softails require one quart of primary fluid. Be sure to check your owner’s manual or the AMSOIL Product Guide for the correct primary oil capacity for your bike.
Can you use syn oil on a 05 1200C?
Hey Nikko, I was where your at a few years ago with my 05 1200c. I read article after article vs. brand vs. type vs. study vs. scientist vs. companys and so on. So I tried a syn oil, it took about 1000 miles before I dumped it and went back to a HD lube for both holes and I haven’t looked at another syn oil since.
What kind of oil do you use for primary and transmission?
For those that prefer a specialized fluid, the V-Twin Primary and V-Twin Transmission Fluids will certainly provide outstanding performance and protection. AMSOIL 20W-50 Synthetic Motorcycle Oil is specifically designed to withstand the rigors of engine, transmission and primary chaincase use.